ICALEPCS1991 - List of Keywords (proton)

Paper	Title	Other Keywords	Page
S11LLC05	Fast Automatic System for Measurements of Beam Parameters of the MMF Linac	controls, linac, interface, ECR	389
	P.I. Reinhardt-Nickulin, S. Bragin, N.G. Ilinsky, Y. Senichev RAS/INR, Moscow, Russia
	Fast transverse beam profile and current monitoring systems have been tested at the Linear Accelerator of Moscow Meson Factory. The signals for each system are derived from multiwire secondary emission chamber and beam current transformer. Each beam pulse is digitized by fast ADC’s. There are two modes for systems. First one is for detailed beam adjustment and second one is for normal 100 Hz rate of the MMF Linac. Essential features of the hardware, software, data acquisition, measurement accuracy and beam results are presented.
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS1991-S11LLC05
About •	Received ※ 11 November 1991 — Accepted ※ 20 November 1991 — Issued ※ 04 December 1992
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

S13MMI03	The Replacement of Touch-Terminal Consoles of the CERN Antiproton Accumulator Complex (AAC) by Office PCs As Well as X-Windows Based Workstations	controls, Windows, software, antiproton	456
	V. Chohan, I. Deloose, G. Shering CERN, Geneva, Switzerland
	With aging hardware and expensive maintenance and replacement possibilities, it was decided to upgrade the CERN Antiproton Accumulator Complex (AAC) touch terminal consoles with modern hardware. With significant amount of operational application software developed with touch terminals over 10 years, the philosophy adopted was to attempt a total emulation of these console functions of touch actions, graphics display as well as simple keyboard terminal entry onto the front-end computer controlling the AAC. The PC based emulation by mouse and multiple windows under MS-DOS and later, under the Windows 3 environment was realized relatively quickly; the next stage was therefore to do the same on the Unix platform using software based on X-Windows. The communications channel was established using the TCP/IP socket library. This paper reviews this work up to the operational implementation for routine control room usage for both these solutions.
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS1991-S13MMI03
About •	Received ※ 11 November 1991 — Accepted ※ 20 November 1991 — Issued ※ 04 December 1992
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

S18BPA02	Frequency Domain Analyses of Schottky Signals Using a VME Based Data Server and a Workstation Client	controls, software, antiproton, injection	579
	A. Chapman-Hatchett, V. Chohan, I. Deloose, F. Pedersen CERN, Geneva, Switzerland
	Schottky signals are extensively used for observation, setting-up and operation of CERN’s Antiproton rings, namely the AC, the AA and LEAR. Measurement of these signals is, at present, carried out by a series of commercial instruments. These instruments have to be individually controlled and read by each application program. The operational use of the system is limited by the capabilities of the individual instruments. The first objective for the new system was to provide, as far as possible, a true "server". The "client" application program simply requests the data it requires. It is then supplied with measured and processed data. This provides the operator with a fast response by having ready processed data always available. Our second goal was to make the system operationally simple, with multiple windows and presentation on a single screen. This paper discusses some aspects of this implementation and applications for the antiproton production, collection, and storage rings.
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS1991-S18BPA02
About •	Received ※ 11 November 1991 — Accepted ※ 20 November 1991 — Issued ※ 04 December 1992
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

S11LLC05

Fast Automatic System for Measurements of Beam Parameters of the MMF Linac

controls, linac, interface, ECR

389

P.I. Reinhardt-Nickulin, S. Bragin, N.G. Ilinsky, Y. Senichev
RAS/INR, Moscow, Russia

Fast transverse beam profile and current monitoring systems have been tested at the Linear Accelerator of Moscow Meson Factory. The signals for each system are derived from multiwire secondary emission chamber and beam current transformer. Each beam pulse is digitized by fast ADC’s. There are two modes for systems. First one is for detailed beam adjustment and second one is for normal 100 Hz rate of the MMF Linac. Essential features of the hardware, software, data acquisition, measurement accuracy and beam results are presented.

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS1991-S11LLC05

About •

Received ※ 11 November 1991 — Accepted ※ 20 November 1991 — Issued ※ 04 December 1992

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

S13MMI03

The Replacement of Touch-Terminal Consoles of the CERN Antiproton Accumulator Complex (AAC) by Office PCs As Well as X-Windows Based Workstations

controls, Windows, software, antiproton

456

V. Chohan, I. Deloose, G. Shering
CERN, Geneva, Switzerland

With aging hardware and expensive maintenance and replacement possibilities, it was decided to upgrade the CERN Antiproton Accumulator Complex (AAC) touch terminal consoles with modern hardware. With significant amount of operational application software developed with touch terminals over 10 years, the philosophy adopted was to attempt a total emulation of these console functions of touch actions, graphics display as well as simple keyboard terminal entry onto the front-end computer controlling the AAC. The PC based emulation by mouse and multiple windows under MS-DOS and later, under the Windows 3 environment was realized relatively quickly; the next stage was therefore to do the same on the Unix platform using software based on X-Windows. The communications channel was established using the TCP/IP socket library. This paper reviews this work up to the operational implementation for routine control room usage for both these solutions.

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS1991-S13MMI03

About •

Received ※ 11 November 1991 — Accepted ※ 20 November 1991 — Issued ※ 04 December 1992

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

S18BPA02

Frequency Domain Analyses of Schottky Signals Using a VME Based Data Server and a Workstation Client

controls, software, antiproton, injection

579

A. Chapman-Hatchett, V. Chohan, I. Deloose, F. Pedersen
CERN, Geneva, Switzerland

Schottky signals are extensively used for observation, setting-up and operation of CERN’s Antiproton rings, namely the AC, the AA and LEAR. Measurement of these signals is, at present, carried out by a series of commercial instruments. These instruments have to be individually controlled and read by each application program. The operational use of the system is limited by the capabilities of the individual instruments. The first objective for the new system was to provide, as far as possible, a true "server". The "client" application program simply requests the data it requires. It is then supplied with measured and processed data. This provides the operator with a fast response by having ready processed data always available. Our second goal was to make the system operationally simple, with multiple windows and presentation on a single screen. This paper discusses some aspects of this implementation and applications for the antiproton production, collection, and storage rings.

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS1991-S18BPA02

About •

Received ※ 11 November 1991 — Accepted ※ 20 November 1991 — Issued ※ 04 December 1992

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)