ICALEPCS1991 - List of Keywords (extraction)

Paper	Title	Other Keywords	Page
S04SRS05	Beam Extraction Controlsystems of the Fast-Cycling Synchrotron	controls, synchrotron, operation, target	174
	A. Toumanian, A. Kazarian, N. Khoetsian, N. Zapolski YerPhI, Yerevan, Armenia
	A compact system controlling the extraction of different beams (gamma, electron, synchrotron radiation) in single and simultaneous operation modes at high electromagnetic disturbances level based on using one computer of IBM PC/AT type is described.
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS1991-S04SRS05
About •	Received ※ 11 November 1991 — Accepted ※ 20 November 1991 — Issued ※ 04 December 1992
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

S04SRS08	VME Computer Monitoring System of KEK-PS Fast Pulsed Magnet Currents and Beam Intensities	booster, kicker, injection, septum	184
	T. Kawakubo, A. Akiyama, T. Ishida, E. Kadokura KEK, Ibaraki, Japan T. Ishida Mitsubishi Electric Corporation, Tokyo, Japan
	For beam transfer from the KEK-PS Linac to the Booster synchrotron ring and from the Booster to the Main ring, many pulse magnets have been installed. It is very important for the machine operation to monitor the firing time, rising time and peak value of the pulsed magnet currents. It is also very important for magnet tuning to obtain good injection efficiency of the Booster and the Main ring, and to observe the last circulating bunched beam in the Booster as well as the first circulating in the Main. These magnet currents and beam intensity signals are digitized by a digital oscilloscope with signal multiplexers, and then shown on a graphic display screen of the console via a VME computer.
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS1991-S04SRS08
About •	Received ※ 11 November 1991 — Accepted ※ 20 November 1991 — Issued ※ 04 December 1992
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

S04SRS05

Beam Extraction Controlsystems of the Fast-Cycling Synchrotron

controls, synchrotron, operation, target

174

A. Toumanian, A. Kazarian, N. Khoetsian, N. Zapolski
YerPhI, Yerevan, Armenia

A compact system controlling the extraction of different beams (gamma, electron, synchrotron radiation) in single and simultaneous operation modes at high electromagnetic disturbances level based on using one computer of IBM PC/AT type is described.

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS1991-S04SRS05

About •

Received ※ 11 November 1991 — Accepted ※ 20 November 1991 — Issued ※ 04 December 1992

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

S04SRS08

VME Computer Monitoring System of KEK-PS Fast Pulsed Magnet Currents and Beam Intensities

booster, kicker, injection, septum

184

T. Kawakubo, A. Akiyama, T. Ishida, E. Kadokura
KEK, Ibaraki, Japan
T. Ishida
Mitsubishi Electric Corporation, Tokyo, Japan

For beam transfer from the KEK-PS Linac to the Booster synchrotron ring and from the Booster to the Main ring, many pulse magnets have been installed. It is very important for the machine operation to monitor the firing time, rising time and peak value of the pulsed magnet currents. It is also very important for magnet tuning to obtain good injection efficiency of the Booster and the Main ring, and to observe the last circulating bunched beam in the Booster as well as the first circulating in the Main. These magnet currents and beam intensity signals are digitized by a digital oscilloscope with signal multiplexers, and then shown on a graphic display screen of the console via a VME computer.

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS1991-S04SRS08

About •

Received ※ 11 November 1991 — Accepted ※ 20 November 1991 — Issued ※ 04 December 1992

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)