IBIC2023 - List of Authors (He, J.)

Paper	Title	Page
MOP003	Design of HEPS Storage Ring Beam Instrumentation
	J.H. Yue, J.S. Cao, Y.Y. Du, J. He, F. Liu, X.Y. Liu, Z. Liu, Y.H. Lu, H.Z. Ma, Y.F. Sui, L. Wang, S.J. Wei, T.G. Xu, Q. Ye, L. Yu, W. Zhang, Y. Zhao, D.C. Zhu IHEP, Beijing, People’s Republic of China A.X. Wang USTC/NSRL, Hefei, Anhui, People’s Republic of China
	HEPS is a fourth generation light source which has horizontal emittance around 34pm.rad to gain the high brilliance photon beam, this ultra-low emittance brings many engineering challenges for beam instrumentation. The resolution of the beam position measurement and the beam size measurement is need to reach sub-micro meter. The large current and multi-bunches need bunch by bunch feedback system to cure instabilities. This paper will present an overview of beam instrumentation
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOP026	A Novel BPM Mechanical Center Calibration Method Based on Laser Ranging	82
	X.H. Tang, J.S. Cao, Y.Y. Du, J. He, Y.F. Sui, J.H. Yue IHEP, Beijing, People’s Republic of China
	Determining the mechanical center of the beam position monitor(BPM) has been a difficulty for BPM calibration. To solve this problem, a method of positioning the BPM mechanical center based on laser ranging is proposed. This method uses high-precision antenna support as the core locating datum, and high-precision laser ranging sensors(LRSs) as the detection tool. By detecting the distances from the LRSs to the antenna support and the distances from the LRSs to the BPM, the mechanical center of the BPM can be indirectly determined. The theoretical system error of this method is within 20¿m, and the experimental results show that the measurement repeatability is less than 40¿m, This method has low cost and fast speed, which can be used for large-scale calibration.
	Poster MOP026 [1.142 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-IBIC2023-MOP026
About •	Received ※ 13 July 2023 — Revised ※ 07 September 2023 — Accepted ※ 14 September 2023 — Issue date ※ 26 September 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

MOP003

Design of HEPS Storage Ring Beam Instrumentation

J.H. Yue, J.S. Cao, Y.Y. Du, J. He, F. Liu, X.Y. Liu, Z. Liu, Y.H. Lu, H.Z. Ma, Y.F. Sui, L. Wang, S.J. Wei, T.G. Xu, Q. Ye, L. Yu, W. Zhang, Y. Zhao, D.C. Zhu
IHEP, Beijing, People’s Republic of China
A.X. Wang
USTC/NSRL, Hefei, Anhui, People’s Republic of China

HEPS is a fourth generation light source which has horizontal emittance around 34pm.rad to gain the high brilliance photon beam, this ultra-low emittance brings many engineering challenges for beam instrumentation. The resolution of the beam position measurement and the beam size measurement is need to reach sub-micro meter. The large current and multi-bunches need bunch by bunch feedback system to cure instabilities. This paper will present an overview of beam instrumentation

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOP026

A Novel BPM Mechanical Center Calibration Method Based on Laser Ranging

82

X.H. Tang, J.S. Cao, Y.Y. Du, J. He, Y.F. Sui, J.H. Yue
IHEP, Beijing, People’s Republic of China

Determining the mechanical center of the beam position monitor(BPM) has been a difficulty for BPM calibration. To solve this problem, a method of positioning the BPM mechanical center based on laser ranging is proposed. This method uses high-precision antenna support as the core locating datum, and high-precision laser ranging sensors(LRSs) as the detection tool. By detecting the distances from the LRSs to the antenna support and the distances from the LRSs to the BPM, the mechanical center of the BPM can be indirectly determined. The theoretical system error of this method is within 20¿m, and the experimental results show that the measurement repeatability is less than 40¿m, This method has low cost and fast speed, which can be used for large-scale calibration.

Poster MOP026 [1.142 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-IBIC2023-MOP026

About •

Received ※ 13 July 2023 — Revised ※ 07 September 2023 — Accepted ※ 14 September 2023 — Issue date ※ 26 September 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)