IBIC2023 - List of Authors (Gabourin, S.)

Paper	Title	Page
TUP038	BCM System Optimization for ESS Beam Commissioning through the DTL Tank4	277
	H. Hassanzadegan, R.A. Baron, S. Gabourin, H. Kocevar, M. Mohammednezhad, J.F.J. Murari, S. Pavinato, K.E. Rosengren, T.J. Shea, R. Zeng ESS, Lund, Sweden K. Czuba, P.K. Jatczak Warsaw University of Technology, Institute of Electronic Systems, Warsaw, Poland
	The ESS BCM system is not only used for beam measurement but it also plays an important role for machine protection particularly in the normal-conducting part of the linac. During the previous beam commissionings to the MEBT and DTL1 FCs and before the cavities were fully conditioned, RF breakdowns and other types of discharges in the cavities had a major impact on beam availability due to the Fast machine protection functions of the BCM. Following an investigation on the root cause of the beam trips, the configuration of the machine protection functions was modified to improve beam availability in the more recent beam commissioning to the DTL4 FC. In addition to this, some optimizations were made in the BCM system to improve beam measurement, and a few more functions were added based on new requirements. This paper reports on these improvements and the results obtained during the beam commissioning through the DTL4.
	Poster TUP038 [2.040 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-IBIC2023-TUP038
About •	Received ※ 31 July 2023 — Revised ※ 11 September 2023 — Accepted ※ 14 September 2023 — Issue date ※ 14 September 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

BCM System Optimization for ESS Beam Commissioning through the DTL Tank4

277

H. Hassanzadegan, R.A. Baron, S. Gabourin, H. Kocevar, M. Mohammednezhad, J.F.J. Murari, S. Pavinato, K.E. Rosengren, T.J. Shea, R. Zeng
ESS, Lund, Sweden
K. Czuba, P.K. Jatczak
Warsaw University of Technology, Institute of Electronic Systems, Warsaw, Poland

The ESS BCM system is not only used for beam measurement but it also plays an important role for machine protection particularly in the normal-conducting part of the linac. During the previous beam commissionings to the MEBT and DTL1 FCs and before the cavities were fully conditioned, RF breakdowns and other types of discharges in the cavities had a major impact on beam availability due to the Fast machine protection functions of the BCM. Following an investigation on the root cause of the beam trips, the configuration of the machine protection functions was modified to improve beam availability in the more recent beam commissioning to the DTL4 FC. In addition to this, some optimizations were made in the BCM system to improve beam measurement, and a few more functions were added based on new requirements. This paper reports on these improvements and the results obtained during the beam commissioning through the DTL4.

Poster TUP038 [2.040 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-IBIC2023-TUP038

About •

Received ※ 31 July 2023 — Revised ※ 11 September 2023 — Accepted ※ 14 September 2023 — Issue date ※ 14 September 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)