IBIC2023 - List of Authors (Enders, J.)

Paper	Title	Page
TUP009	Bunch Length Measurement System Downstream the Injector of the S-DALINAC	200
	A. Brauch, M. Arnold, M. Dutine, J. Enders, R. Grewe, L.E. Jürgensen, N. Pietralla, F. Schließmann, D. Schneider TU Darmstadt, Darmstadt, Germany
	Funding: Work supported by the State of Hesse within the Cluster Project ELEMENTS (Project ID 500/10.006) and by DFG (GRK 2128 AccelencE). The S-DALINAC is a thrice recirculating electron accelerator for high resolution electron scattering experiments with a continuous-wave beam at a frequency of 2.9972(1) GHz. Short bunches are crucial to enable tuning of the machine for operation as an energy-recovery linear accelerator* *. Currently, measurements of this beam parameter are accomplished by using the radio-frequency zero-crossing method: here, a momentum spread chirp is induced and the transverse beam profile in a downstream located dispersive section is measured with a scintillating screen providing an upper limit of the bunch length. Since this method is time consuming, a new setup for these measurements using a streak camera is developed. Optical transition radiation from an aluminum-coated Kapton target is used to map the bunch length information to a light pulse which enables an accurate measurement compared to a scintillating screen. The light pulse can then be evaluated with the streak camera by projecting its length onto the transverse dimension on a phosphor screen. This contribution will present the current status of the measurement setup as well as its design and properties. Michaela Arnold et al., Phys. Rev. Acc. Beams 23, 020101 (2020). **F. Schliessmann et al., Nat. Phys. 19, 597-602 (2023).
DOI •	reference for this paper ※ doi:10.18429/JACoW-IBIC2023-TUP009
About •	Received ※ 06 September 2023 — Revised ※ 08 September 2023 — Accepted ※ 12 September 2023 — Issue date ※ 22 September 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Bunch Length Measurement System Downstream the Injector of the S-DALINAC

200

A. Brauch, M. Arnold, M. Dutine, J. Enders, R. Grewe, L.E. Jürgensen, N. Pietralla, F. Schließmann, D. Schneider
TU Darmstadt, Darmstadt, Germany

Funding: Work supported by the State of Hesse within the Cluster Project ELEMENTS (Project ID 500/10.006) and by DFG (GRK 2128 AccelencE).
The S-DALINAC is a thrice recirculating electron accelerator for high resolution electron scattering experiments with a continuous-wave beam at a frequency of 2.9972(1) GHz. Short bunches are crucial to enable tuning of the machine for operation as an energy-recovery linear accelerator* **. Currently, measurements of this beam parameter are accomplished by using the radio-frequency zero-crossing method: here, a momentum spread chirp is induced and the transverse beam profile in a downstream located dispersive section is measured with a scintillating screen providing an upper limit of the bunch length. Since this method is time consuming, a new setup for these measurements using a streak camera is developed. Optical transition radiation from an aluminum-coated Kapton target is used to map the bunch length information to a light pulse which enables an accurate measurement compared to a scintillating screen. The light pulse can then be evaluated with the streak camera by projecting its length onto the transverse dimension on a phosphor screen. This contribution will present the current status of the measurement setup as well as its design and properties.
*Michaela Arnold et al., Phys. Rev. Acc. Beams 23, 020101 (2020).
**F. Schliessmann et al., Nat. Phys. 19, 597-602 (2023).

DOI •

reference for this paper ※ doi:10.18429/JACoW-IBIC2023-TUP009

About •

Received ※ 06 September 2023 — Revised ※ 08 September 2023 — Accepted ※ 12 September 2023 — Issue date ※ 22 September 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)