JACoW is a publisher in Geneva, Switzerland that publishes the proceedings of accelerator conferences held around the world by an international collaboration of editors.
@inproceedings{lipka:ibic2023-tup037,
author = {D. Lipka and T. Lensch and Re. Neumann and M. Werner},
title = {{Charge Measurement with Resonators at ARES}},
% booktitle = {Proc. IBIC'23},
booktitle = {Proc. 12th Int. Beam Instrum. Conf. (IBIC'23)},
eventdate = {2023-09-10/2023-09-14},
pages = {273--276},
paper = {TUP037},
language = {english},
keywords = {electron, electronics, cavity, linac, experiment},
venue = {Saskatoon, Canada},
series = {International Beam Instrumentation Conference},
number = {12},
publisher = {JACoW Publishing, Geneva, Switzerland},
month = {12},
year = {2023},
issn = {2673-5350},
isbn = {978-3-95450-236-3},
doi = {10.18429/JACoW-IBIC2023-TUP037},
url = {https://jacow.org/ibic2023/papers/tup037.pdf},
abstract = {{The ARES facility (Accelerator Research Experiment at SINBAD) is an accelerator to produce low charge ultra-short electron bunches within a range of currently 0.5 pC to 200 pC. Especially for eFLASH experiments at ARES an absolute, non-destructive charge measurement is required. To measure an absolute charge of individual bunches different types of monitors are installed. A destructive Faraday Cup is used as reference charge measurement device. To measure the charge non-destructively 2 Toroids, 1 Turbo-ICT and 2 cavity monitors are installed. The latter system consists of the cavity, front-end electronics with logarithmic detectors and µTCA ADCs. The laboratory calibration of the cavity system is performed by using an arbitrary waveform generator which generate the same waveform like the cavity with beam. This results in a non-linear look-up table used to calculate the ADC amplitude in charge values independent of beam-based calibration. The measured charges from the cavity monitors agree very well within few percent in comparison with the Faraday Cup results.}},
}