IBIC2021 - List of Authors (Calvo Giraldo, E.)

Paper	Title	Page
TUPP32	The Beam Loss Monitoring System after LHC Injectors Upgrade at CERN	285
	M. Saccani, E. Calvo Giraldo, W. Viganò, C. Zamantzas CERN, Meyrin, Switzerland
	The LHC Injector Upgrade project aims to increase the brightness of the beams available and improve the efficiency of the whole accelerator chain. The Beam Loss Monitoring (BLM) system is a key element of CERN’s accelerator instrumentation for beam optimisation and machine protection by producing continuous and reliable beam loss measurements while ensuring safe operation. The new BLM system for the LHC Injectors aimed to provide faster measures with a higher dynamic range, to install more detectors along the beamlines and to give the operator more flexible use. A review will be given on the versatility provided by the system to cover requirements from various accelerators and their transfer lines, focusing on the measurements and the operational scenarios.
	Poster TUPP32 [2.256 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2021-TUPP32
About •	paper received ※ 08 September 2021 paper accepted ※ 16 September 2021 issue date ※ 17 October 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPP33	Beam Loss Signal Calibration for the LHC Diamond Detectors During Run 2	290
	S. Morales Vigo, E. Calvo Giraldo, E. Effinger, B. Salvachua, C. Zamantzas CERN, Meyrin, Switzerland C.P. Welsch, J. Wolfenden The University of Liverpool, Liverpool, United Kingdom
	Chemical Vapour Deposition (CVD) diamond detectors can be used as fast beam loss monitors in particle accelerators. In the Large Hadron Collider (LHC) at CERN, they are installed in the betatron collimation region, a high-radiation environment. In addition to their high-radiation tolerance, their main advantage is a time resolution of 1 ns which makes possible not only turn-by-turn, but also bunch-by-bunch loss measurements. An analysis of the LHC diamond beam loss monitor signals recorded during the last months of Run 2 (September 2018-November 2018) is presented with the aim of obtaining a signal-to-beam loss calibration.
	Poster TUPP33 [3.728 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2021-TUPP33
About •	paper received ※ 08 September 2021 paper accepted ※ 16 September 2021 issue date ※ 20 October 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The Beam Loss Monitoring System after LHC Injectors Upgrade at CERN

285

M. Saccani, E. Calvo Giraldo, W. Viganò, C. Zamantzas
CERN, Meyrin, Switzerland

The LHC Injector Upgrade project aims to increase the brightness of the beams available and improve the efficiency of the whole accelerator chain. The Beam Loss Monitoring (BLM) system is a key element of CERN’s accelerator instrumentation for beam optimisation and machine protection by producing continuous and reliable beam loss measurements while ensuring safe operation. The new BLM system for the LHC Injectors aimed to provide faster measures with a higher dynamic range, to install more detectors along the beamlines and to give the operator more flexible use. A review will be given on the versatility provided by the system to cover requirements from various accelerators and their transfer lines, focusing on the measurements and the operational scenarios.

Poster TUPP32 [2.256 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2021-TUPP32

About •

paper received ※ 08 September 2021 paper accepted ※ 16 September 2021 issue date ※ 17 October 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPP33

Beam Loss Signal Calibration for the LHC Diamond Detectors During Run 2

290

S. Morales Vigo, E. Calvo Giraldo, E. Effinger, B. Salvachua, C. Zamantzas
CERN, Meyrin, Switzerland
C.P. Welsch, J. Wolfenden
The University of Liverpool, Liverpool, United Kingdom

Chemical Vapour Deposition (CVD) diamond detectors can be used as fast beam loss monitors in particle accelerators. In the Large Hadron Collider (LHC) at CERN, they are installed in the betatron collimation region, a high-radiation environment. In addition to their high-radiation tolerance, their main advantage is a time resolution of 1 ns which makes possible not only turn-by-turn, but also bunch-by-bunch loss measurements. An analysis of the LHC diamond beam loss monitor signals recorded during the last months of Run 2 (September 2018-November 2018) is presented with the aim of obtaining a signal-to-beam loss calibration.

Poster TUPP33 [3.728 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2021-TUPP33

About •

paper received ※ 08 September 2021 paper accepted ※ 16 September 2021 issue date ※ 20 October 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)