JACoW logo

Joint Accelerator Conferences Website

The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.


https://doi.org/10.18429/JACoW-IBIC2019-TUPP017
Title Thermal Performance of Diamond SR Extraction Mirrors for SuperKEKB
Authors
  • J.W. Flanagan, M. Arinaga, H. Fukuma, H. Ikeda, G. Mitsuka, Y. Suetsugu
    KEK, Ibaraki, Japan
  • E. Mulyani
    BATAN, Yogyakarta, Indonesia
  • E. Mulyani
    Sokendai, Ibaraki, Japan
Abstract The SuperKEKB accelerator is a high-current, low-emittance upgrade to the KEKB double ring collider. The beryllium extraction mirrors used for the synchrotron radiation (SR) monitors at KEKB suffered from heat distortion due to incident SR, leading to systematic changes in magnification with beam current, and necessitating continuous monitoring and compensation of such distortions in order to correctly measure the beam sizes.* To minimize such mirror distortions, quasi-monocrystalline CVD diamond mirrors have been designed and installed at SuperKEKB.** Diamond has a very high heat conductance and a low thermal expansion coefficient. With such mirrors it is hoped to reduce the beam current-dependent magnification to the level of a few percent at SuperKEKB. Preliminary measurements of mirror distortion during SuperKEKB commissioning show very promising results with regard to thermal performance, though full beam currents have not yet been stored in the SuperKEKB rings. Measurements of the thermal deformation of the diamond mirrors will be presented in this paper, along with a description of the design of the mirrors and their mounts, and issues encountered during commissioning.
Footnotes & References *M. Arinaga et al., NIM, A499, p. 100 (2003).
**J.W. Flanagan et al., "Diamond mirrors for the SuperKEKB synchrotron radiation monitors," Proc. IBIC2012, Tsukuba, Japan p. 515 (2012).
Paper download TUPP017.PDF [1.865 MB / 4 pages]
Export download ※ BibTeX LaTeXText/WordRISEndNote
Conference IBIC2019
Series International Beam Instrumentation Conferenc (8th)
Location Malmö, Sweden
Date 08-12 September 2019
Publisher JACoW Publishing, Geneva, Switzerland
Editorial Board Volker RW Schaa (GSI, Darmstadt, Germany); Andreas Jansson (ESS, Lund, Sweden); Thomas Shea (ESS, Lund, Sweden); Johan Olander (ESS, Lund, Sweden)
Online ISBN 978-3-95450-204-2
Online ISSN 2673-5350
Received 09 September 2019
Accepted 10 September 2019
Issue Date 10 November 2019
DOI doi:10.18429/JACoW-IBIC2019-TUPP017
Pages 332-335
Copyright
Creative Commons CC logoPublished by JACoW Publishing under the terms of the Creative Commons Attribution 3.0 International license. Any further distribution of this work must maintain attribution to the author(s), the published article's title, publisher, and DOI.