The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - UNPB AU - Woo, H.J. AU - Chung, Y.S. AU - Kim, G.D. AU - Kwon, J.W. ED - Schaa, Volker RW TI - Design of Beam Diagnostics System for Heavy Ion Accelerator Facility, RAON J2 - Proc. of IBIC2018, Shanghai, China, 09-13 September 2018 CY - Shanghai, China T2 - International Beam Instrumentation Conference T3 - 7 LA - english AB - The ultimate goal of the superconducting LINAC at RISP is to accelerate uranium and proton beams up to 200 MeV/u and 600 MeV, with a maximum beam currents of 8.3 pµA and 660 pµA, respectively. The driver linac is divided into several sections: low energy superconducting linac SCL1 for stable ions and SCL3 for rare isotopes, charge stripper section, and high energy superconducting linac (SCL2). Various types of beam diagnostic devices such as beam current monitor, beam position monitor (BPM), beam profile monitor, beam phase monitor, and beam loss monitor, etc. are required for the setting of accelerator parameters, the monitoring and control of beam acceleration and transport, and improvement of accelerator system. The arrangement of beam diagnostic devices was initially based on the result of beam dynamics calculation, and now the overall layout becomes almost settled. More than 600 devices will be installed for commissioning and normal operation. This report introduces the overall layout of the beam diagnostic system and present status of the system construction. PB - JACoW Publishing CP - Geneva, Switzerland ER -