The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - CONF AU - Podadera, I. AU - Guirao, A. AU - Jiménez-Rey, D. AU - Martínez, L.M. AU - Mollá, J. AU - Soleto, A. AU - Varela, R. ED - Schaa, Volker RW TI - Commisioning of Beam Position and Phase Monitors for LIPAc J2 - Proc. of IBIC2016, Barcelona, Spain, Sept. 13-18, 2016 C1 - Barcelona, Spain T2 - International Beam Instrumentation Conference T3 - 5 LA - english AB - The LIPAc accelerator will be a 9 MeV, 125 mA CW deuteron accelerator which aims to validate the technology that will be used in the future IFMIF accelerator. Several types of Beam Position Monitors BPMs- are placed in each section of the accelerator to ensure a good beam transport and minimize beam losses. LIPAc is presently under installation and commissioning of the second acceleration stage at 5 MeV. In this stage two types of BPMs are used: four striplines to control the position at the Medium Energy Beam Transport line (MEBT), and three striplines to precisely measure the mean beam energy at the Diagnostics Plate. The seven pickups have been installed and assembled in the beamlines after characterization in a wire test bench, and are presently been commissioned in the facility. In addition, the in-house acquisition system has been fully developed and tested in the wire test bench at CIEMAT. In this contribution, the results of the beam position monitors characterization, the tests carried out during the assembly and the first measurements with the electronics system will be reported. PB - JACoW CP - Geneva, Switzerland SP - 327 EP - 329 KW - pick-up KW - coupling KW - simulation KW - vacuum KW - electronics DA - 2017/02 PY - 2017 SN - 978-3-95450-177-9 DO - 10.18429/JACoW-IBIC2016-TUPG07 UR - http://jacow.org/ibic2016/papers/tupg07.pdf ER -