Paper |
Title |
Page |
WEP1WB02 |
Beam Dynamics Simulation and Measurements for the IFMIF/EVEDA Project |
210 |
|
- M. Comunian, L. Antoniazzi, A. Baldo, C. Baltador, L. Bellan, D. Bortolato, M. Cavenago, E. Fagotti, M.G. Giacchini, F. Grespan, M. Montis, A. Palmieri, A. Pisent, F. Scantamburlo
INFN/LNL, Legnaro (PD), Italy
- L. Bellan
Univ. degli Studi di Padova, Padova, Italy
- N. Chauvin
IRFU, CEA, University Paris-Saclay, Gif-sur-Yvette, France
- H. Dzitko
F4E, Germany
|
|
|
In the framework of IFMIF/EVEDA project the source and RFQ are ready to be tested with beam. In this article the beam dynamics simulation and the measurement performed in preparation of the first beam injection are presented. The installed line is composed by the proton and deuteron Source with the LEBT composed of two solenoids that inject in the 10 meters long RFQ, the MEBT, diagnostic plate and the beam dump. The line is prepared to be tested with protons of 8 mA in pulsed mode (up to 0.1%).
|
|
|
Slides WEP1WB02 [10.303 MB]
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-HB2018-WEP1WB02
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
THP1WB01 |
Commissioning Status of Linear IFMIF Prototype Accelerator (LIPAc) |
366 |
|
- A. Kasugai, T. Akagi, T. Ebisawa, Y. Hirata, R. Ichimiya, K. Kondo, S. Maebara, K. Sakamoto, T. Shinya, M. Sugimoto
QST, Aomori, Japan
- P. Abbon, N. Bazin, B. Bolzon, N. Chauvin, S. Chel, R. Gobin, J. Marroncle, B. Renard
CEA/DSM/IRFU, France
- L. Antoniazzi, L. Bellan, D. Bortolato, M. Comunian, E. Fagotti, F. Grespan, M. Montis, A. Palmieri, A. Pisent
INFN/LNL, Legnaro (PD), Italy
- P.-Y. Beauvais, H. Dzitko, D. Gex, A. Jokinen, G. Phillips
F4E, Germany
- P. Cara, R. Heidinger, I. Moya
Fusion for Energy, Garching, Germany
- D. Jiménez-Rey, I. Kirpitchev, J. Mollá, P. Méndez, I. Podadera, D. Regidor, M. Weber, C. de la Morena
CIEMAT, Madrid, Spain
- J. Knaster, A. Marqueta, G. Pruneri, F. Scantamburlo
IFMIF/EVEDA, Rokkasho, Japan
|
|
|
The IFMIF project aiming at material tests for a future fusion DEMO reactor is under the EVEDA phase in the BA Agreement of fusion program between Japan and EU. As the accelerator activity, the installation and commissioning of the Linear IFMIF Prototype Accelerator (LIPAc) is at the second stage of demonstration of the feasibility of the low energy section of an IFMIF deuteron accelerator up to 9 MeV with a beam current of 125 mA, CW. The installation of injector, RFQ, MEBT, D-Plate and LPBD for LIPAc with 8 coaxial high-power transmission lines and RF power system was just done in 2017 at Rokkasho, Japan. After that, the RF conditioning of RFQ for beam commissioning is underway. The beam commissioning of RFQ with H+/D+ and the acceleration demonstration up to 5 MeV-125 mA-0.1% duty cycle with D+ will be done.
|
|
|
Slides THP1WB01 [13.177 MB]
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-HB2018-THP1WB01
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|