HB2016 - List of Authors (Fu, S.)

Paper	Title	Page
MOPR002	Study on the Magnetic Measurement Results of the Injection System for CSNS/RCS	46
	M.Y. Huang, S. Fu, N. Huang, L. Huo, H.F. Ji, W. Kang, Y.Q. Liu, J. Peng, J. Qiu, L. Shen, S. Wang, X. Wu, S.Y. Xu, J. Zhang, G.Z. Zhou IHEP, Beijing, People's Republic of China
	Funding: Work supported by National Natural Science Foundation of China (11205185) A combination of the H⁻ stripping and phase space painting method is used to accumulate a high intensity beam in the Rapid Cycling Synchrotron (RCS) of the China Spallation Neutron Source (CSNS). The injection system for CSNS/RCS consists of three kinds of magnets: four direct current magnets (BC1-BC4), eight alternating current magnets (BH1-BH4 and BV1-BV4), two septum magnets (ISEP1 and ISEP2). In this paper, the magnetic measurements of the injection system were introduced and the data analysis was processed. The field uniformity and magnetizing curves of these magnets were given, and then the magnetizing fitting equations were obtained.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPM2Y01	Beam Commissioning Results for the CSNS MEBT and DTL-1	329
	J. Peng, M.T. Li, X.H. Lu CSNS, Guangdong Province, People's Republic of China Y.W. An, S. Fu, L. Huang, M.Y. Huang, Y. Li, Z.P. Li, Y.D. Liu, S. Wang, S.Y. Xu, Y. Yuan IHEP, Beijing, People's Republic of China
	The China Spallation Neutron Source (CSNS) is designed to deliver a 1.6GeV proton beam to a solid metal target for neutron scattering research. It will be constructed in two phases. In the 1st phase, the beam power is designed to be 100kW. In the 2nd phase, the beam power will be upgraded to 500kW by doubling the linac output energy and beam current. The accelerator complex consists of a 50keV H⁻ ion source, a 3MeV Radio Frequency Quadrupole (RFQ), a 80MeV Drift tube Linac (DTL), and a 1.6GeV rapid-cycling synchrotron (RCS). Until March 2016, the front end and the first tank of DTL have been fully commissioned. The primary design goals of peak current, transverse emittance and beam energy have been achieved. This paper reports on the methods and the results of the commissioning.
	Slides TUPM2Y01 [2.398 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Study on the Magnetic Measurement Results of the Injection System for CSNS/RCS

46

M.Y. Huang, S. Fu, N. Huang, L. Huo, H.F. Ji, W. Kang, Y.Q. Liu, J. Peng, J. Qiu, L. Shen, S. Wang, X. Wu, S.Y. Xu, J. Zhang, G.Z. Zhou
IHEP, Beijing, People's Republic of China

Funding: Work supported by National Natural Science Foundation of China (11205185)
A combination of the H⁻ stripping and phase space painting method is used to accumulate a high intensity beam in the Rapid Cycling Synchrotron (RCS) of the China Spallation Neutron Source (CSNS). The injection system for CSNS/RCS consists of three kinds of magnets: four direct current magnets (BC1-BC4), eight alternating current magnets (BH1-BH4 and BV1-BV4), two septum magnets (ISEP1 and ISEP2). In this paper, the magnetic measurements of the injection system were introduced and the data analysis was processed. The field uniformity and magnetizing curves of these magnets were given, and then the magnetizing fitting equations were obtained.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPM2Y01

Beam Commissioning Results for the CSNS MEBT and DTL-1

329

J. Peng, M.T. Li, X.H. Lu
CSNS, Guangdong Province, People's Republic of China
Y.W. An, S. Fu, L. Huang, M.Y. Huang, Y. Li, Z.P. Li, Y.D. Liu, S. Wang, S.Y. Xu, Y. Yuan
IHEP, Beijing, People's Republic of China

The China Spallation Neutron Source (CSNS) is designed to deliver a 1.6GeV proton beam to a solid metal target for neutron scattering research. It will be constructed in two phases. In the 1st phase, the beam power is designed to be 100kW. In the 2nd phase, the beam power will be upgraded to 500kW by doubling the linac output energy and beam current. The accelerator complex consists of a 50keV H⁻ ion source, a 3MeV Radio Frequency Quadrupole (RFQ), a 80MeV Drift tube Linac (DTL), and a 1.6GeV rapid-cycling synchrotron (RCS). Until March 2016, the front end and the first tank of DTL have been fully commissioned. The primary design goals of peak current, transverse emittance and beam energy have been achieved. This paper reports on the methods and the results of the commissioning.

Slides TUPM2Y01 [2.398 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)