FLS2023 - List of Authors (Deng, H.X.)

Paper	Title	Page
TU4P05	Design of the Test Platform for High Current VHF Electron Gun	80
	Z.P. Liu, X.D. Li SINAP, Shanghai, People’s Republic of China H.X. Deng, Z.G. Jiang SARI-CAS, Pudong, Shanghai, People’s Republic of China H.J. Qian DESY Zeuthen, Zeuthen, Germany G. Shu IHEP, Beijing, People’s Republic of China
	A high-average-current VHF electron gun operating in the CW mode is under construction at Shanghai Advanced Research Institute, which is the key component of a kW-power-order free electron laser facility. The average current and the frequency of this electron gun is 1-10 mA and 217 MHz, respectively. To validate the performance of this instrument, a test platform has been designed. The R&D of its vacuum and diagnostics are presented in this work.
DOI •	reference for this paper ※ doi:10.18429/JACoW-FLS2023-TU4P05
About •	Received ※ 23 August 2023 — Revised ※ 28 August 2023 — Accepted ※ 31 August 2023 — Issued ※ 02 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TU4P07	Design of the Beam Distribution System of SHINE	87
	S. Chen SSRF, Shanghai, People’s Republic of China H.X. Deng, X. Fu, B. Liu SARI-CAS, Pudong, Shanghai, People’s Republic of China B.Y. Yan SINAP, Shanghai, People’s Republic of China
	The Shanghai high-repetition-rate XFEL and extreme light facility (SHINE), as the first hard X-ray free electron laser facility in China, is now under construction. CW electron beam with up to 1 MHz bunch repetition rate from a superconducting RF linac is used to feed at least three individual undulator lines that covers a wide photon energy range (0.4 keV ~ 25 keV). In order to maximize the efficiency of the facility, a beam switchyard between the linac and undulator lines is used to enable the simultaneously operation of the three undulator lines. In this work, the schematic design of the beam switchyard for bunch-by-bunch beam separation of CW beam is described, and the current lattice design of the linac-to-undulator deflection branches and the start-to-end tracking simulation results are presented.
DOI •	reference for this paper ※ doi:10.18429/JACoW-FLS2023-TU4P07
About •	Received ※ 22 August 2023 — Revised ※ 28 August 2023 — Accepted ※ 31 August 2023 — Issued ※ 02 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TU4P08	Design and Commissioning of the Beam Switchyard for the SXFEL-UF	91
	S. Chen, K.Q. Zhang SSRF, Shanghai, People’s Republic of China H.X. Deng, C. Feng, B. Liu, T. Liu, Z. Qi, Z.T. Zhao SARI-CAS, Pudong, Shanghai, People’s Republic of China
	As an important measure of improving the efficiency and usability of X-ray free electron laser facilities, parallel operation of multiple undulator lines realized by a beam switchyard has become a standard configuration in the recent built XFEL facilities. SXFEL-UF, the first soft X-ray free electron laser user facility in China, has finished construction and commissioning recently. The electron beams from the linac are separated and delivered alternately to the two parallel undulator beam lines through a beam switchyard. A stable and fast kicker magnet is used to achieve bunch-by-bunch separation. Optics measures are applied to mitigate the impact of various collective effects, such as coherent synchrotron radiation and micro-bunching instability, on the beam quality after passing through the deflection line of the beam switchyard. In this study, the comprehensive physical design of the beam switchyard is described and the latest results of its commissioning process are presented.
	Poster TU4P08 [4.643 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-FLS2023-TU4P08
About •	Received ※ 23 August 2023 — Revised ※ 30 August 2023 — Accepted ※ 31 August 2023 — Issued ※ 02 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WE4P09	Heat Load and Radiation Pulse of Corrugated Structure at SHINE Facility	168
	J.J. Guo Zhangjiang Lab, Shanghai, People’s Republic of China H.X. Deng, D. Gu, Q. Gu, M. Meng, Z. Wang SARI-CAS, Pudong, Shanghai, People’s Republic of China
	Corrugated structure modules are being proposed for installation after the end of the linac and before the undulator regions of SHINE facility, where it has been used for energy chirp control and as a fast kicker for two color operation of the FEL. When ultra-relativistic bunch of electrons passing through corrugated structure will generate strong wakefield, we find most of the wake power lost by the beam is radiated out to the sides of the corrugated structure in the form of THz waves, and the remaining part casue Joule heating load on the corrugated structure wall. In this paper, we estimate the radiation pulse power and Joule power loss of the corrugated structure in SHINE facility.
	Poster WE4P09 [0.787 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-FLS2023-WE4P09
About •	Received ※ 23 August 2023 — Revised ※ 28 August 2023 — Accepted ※ 31 August 2023 — Issued ※ 02 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WE4P14	Layout of the Undulator-to-dump line at the SHINE	177
	T. Liu, S. Chen, H.X. Deng, B. Liu, Z. Qi SARI-CAS, Pudong, Shanghai, People’s Republic of China Z.F. Gao SSRF, Shanghai, People’s Republic of China N. Huang Zhangjiang Lab, Shanghai, People’s Republic of China
	The Shanghai HIgh repetitioN rate XFEL and Extreme light Facility as the first hard X-ray free-electron laser (FEL) facility in China, is currently under construction in the Zhangjiang area, Shanghai. It aims to deliver X-ray covering photon energy range from 0.4 to 25 keV, with electron beam power up to 800 kW. Downstream of the undulator line, the beam transport design of the undulator-to-dump line is critical which is mainly used for realization of FEL diagnostics based on transverse deflecting structure and beam absorption in the dump. In this manuscript we describe the current layout of this system.
DOI •	reference for this paper ※ doi:10.18429/JACoW-FLS2023-WE4P14
About •	Received ※ 20 August 2023 — Revised ※ 22 August 2023 — Accepted ※ 31 August 2023 — Issued ※ 02 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design of the Test Platform for High Current VHF Electron Gun

80

Z.P. Liu, X.D. Li
SINAP, Shanghai, People’s Republic of China
H.X. Deng, Z.G. Jiang
SARI-CAS, Pudong, Shanghai, People’s Republic of China
H.J. Qian
DESY Zeuthen, Zeuthen, Germany
G. Shu
IHEP, Beijing, People’s Republic of China

A high-average-current VHF electron gun operating in the CW mode is under construction at Shanghai Advanced Research Institute, which is the key component of a kW-power-order free electron laser facility. The average current and the frequency of this electron gun is 1-10 mA and 217 MHz, respectively. To validate the performance of this instrument, a test platform has been designed. The R&D of its vacuum and diagnostics are presented in this work.

DOI •

reference for this paper ※ doi:10.18429/JACoW-FLS2023-TU4P05

About •

Received ※ 23 August 2023 — Revised ※ 28 August 2023 — Accepted ※ 31 August 2023 — Issued ※ 02 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TU4P07

Design of the Beam Distribution System of SHINE

87

S. Chen
SSRF, Shanghai, People’s Republic of China
H.X. Deng, X. Fu, B. Liu
SARI-CAS, Pudong, Shanghai, People’s Republic of China
B.Y. Yan
SINAP, Shanghai, People’s Republic of China

The Shanghai high-repetition-rate XFEL and extreme light facility (SHINE), as the first hard X-ray free electron laser facility in China, is now under construction. CW electron beam with up to 1 MHz bunch repetition rate from a superconducting RF linac is used to feed at least three individual undulator lines that covers a wide photon energy range (0.4 keV ~ 25 keV). In order to maximize the efficiency of the facility, a beam switchyard between the linac and undulator lines is used to enable the simultaneously operation of the three undulator lines. In this work, the schematic design of the beam switchyard for bunch-by-bunch beam separation of CW beam is described, and the current lattice design of the linac-to-undulator deflection branches and the start-to-end tracking simulation results are presented.

DOI •

reference for this paper ※ doi:10.18429/JACoW-FLS2023-TU4P07

About •

Received ※ 22 August 2023 — Revised ※ 28 August 2023 — Accepted ※ 31 August 2023 — Issued ※ 02 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TU4P08

Design and Commissioning of the Beam Switchyard for the SXFEL-UF

91

S. Chen, K.Q. Zhang
SSRF, Shanghai, People’s Republic of China
H.X. Deng, C. Feng, B. Liu, T. Liu, Z. Qi, Z.T. Zhao
SARI-CAS, Pudong, Shanghai, People’s Republic of China

As an important measure of improving the efficiency and usability of X-ray free electron laser facilities, parallel operation of multiple undulator lines realized by a beam switchyard has become a standard configuration in the recent built XFEL facilities. SXFEL-UF, the first soft X-ray free electron laser user facility in China, has finished construction and commissioning recently. The electron beams from the linac are separated and delivered alternately to the two parallel undulator beam lines through a beam switchyard. A stable and fast kicker magnet is used to achieve bunch-by-bunch separation. Optics measures are applied to mitigate the impact of various collective effects, such as coherent synchrotron radiation and micro-bunching instability, on the beam quality after passing through the deflection line of the beam switchyard. In this study, the comprehensive physical design of the beam switchyard is described and the latest results of its commissioning process are presented.

Poster TU4P08 [4.643 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-FLS2023-TU4P08

About •

Received ※ 23 August 2023 — Revised ※ 30 August 2023 — Accepted ※ 31 August 2023 — Issued ※ 02 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WE4P09

Heat Load and Radiation Pulse of Corrugated Structure at SHINE Facility

168

J.J. Guo
Zhangjiang Lab, Shanghai, People’s Republic of China
H.X. Deng, D. Gu, Q. Gu, M. Meng, Z. Wang
SARI-CAS, Pudong, Shanghai, People’s Republic of China

Corrugated structure modules are being proposed for installation after the end of the linac and before the undulator regions of SHINE facility, where it has been used for energy chirp control and as a fast kicker for two color operation of the FEL. When ultra-relativistic bunch of electrons passing through corrugated structure will generate strong wakefield, we find most of the wake power lost by the beam is radiated out to the sides of the corrugated structure in the form of THz waves, and the remaining part casue Joule heating load on the corrugated structure wall. In this paper, we estimate the radiation pulse power and Joule power loss of the corrugated structure in SHINE facility.

Poster WE4P09 [0.787 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-FLS2023-WE4P09

About •

Received ※ 23 August 2023 — Revised ※ 28 August 2023 — Accepted ※ 31 August 2023 — Issued ※ 02 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WE4P14

Layout of the Undulator-to-dump line at the SHINE

177

T. Liu, S. Chen, H.X. Deng, B. Liu, Z. Qi
SARI-CAS, Pudong, Shanghai, People’s Republic of China
Z.F. Gao
SSRF, Shanghai, People’s Republic of China
N. Huang
Zhangjiang Lab, Shanghai, People’s Republic of China

The Shanghai HIgh repetitioN rate XFEL and Extreme light Facility as the first hard X-ray free-electron laser (FEL) facility in China, is currently under construction in the Zhangjiang area, Shanghai. It aims to deliver X-ray covering photon energy range from 0.4 to 25 keV, with electron beam power up to 800 kW. Downstream of the undulator line, the beam transport design of the undulator-to-dump line is critical which is mainly used for realization of FEL diagnostics based on transverse deflecting structure and beam absorption in the dump. In this manuscript we describe the current layout of this system.

DOI •

reference for this paper ※ doi:10.18429/JACoW-FLS2023-WE4P14

About •

Received ※ 20 August 2023 — Revised ※ 22 August 2023 — Accepted ※ 31 August 2023 — Issued ※ 02 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)