FEL2019 - List of Authors (Schmidt, T.)

Paper	Title	Page
WEP097	Operational Model of the Athos Undulator Beamline	538
	C. Kittel, M. Calvi, X. Liang, T. Schmidt PSI, Villigen PSI, Switzerland N.J. Sammut University of Malta, Information and Communication Technology, Msida, Malta
	Athos, the new Soft X-ray beamline of SwissFEL, operates 16 Apple X undulators and 15 compact chicanes to implement novel lasing schemes. With the data available after the end of the magnetic measurement campaign (middle 2020), a self-consistent set of equations will be used to summarise all the relevant properties of those devices to start their commissioning. The analytical approach planned will be discussed in great detail and tested with the preliminary experimental data available. Finally, the accuracy of this approach will be evaluated and critically compared to the requirements of the new FEL beamline.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP097
About •	paper received ※ 27 August 2019 paper accepted ※ 28 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP098	Advanced Operational Models of the Apple X Undulator	541
	X. Liang, M. Calvi, C. Kittel, T. Schmidt PSI, Villigen PSI, Switzerland N.J. Sammut University of Malta, Information and Communication Technology, Msida, Malta
	Athos is a new soft X-ray beamline at SwissFEL, where the Apple X type undulators will be equipped. These devices are flexible to produce light in different polarization modes. An adequate magnetic field model is required for the operation of undulator. The undulator deflection parameter K and its gradient are calculated starting from the Fourier series of the magnetic field. In the classical parallel and anti-parallel operational modes - respectively elliptical and linear modes, the variation of the magnetic field as well as its parameters are evaluated by computer modeling. The results are compared to the magnetic measurements of the first Apple X prototype.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP098
About •	paper received ※ 27 August 2019 paper accepted ※ 29 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WED01	Experience with Short-Period, Small Gap Undulators at the SwissFEL Aramis Beamline	564
	T. Schmidt, M. Aiba, A.D. Alarcon, C. Arrell, S. Bettoni, M. Calvi, A. Cassar, E. Ferrari, R. Follath, R. Ganter, N. Hiller, P.N. Juranič, C. Kittel, F. Löhl, E. Prat, S. Reiche, T. Schietinger, D. Voulot, U.H. Wagner PSI, Villigen PSI, Switzerland N.J. Sammut University of Malta, Faculty of Engineering, Msida, Malta
	The SwissFEL Aramis beamline provides hard X-ray FEL radiation down to 1 Angström with 5.8 GeV and short period, 15 mm, in-vacuum undulators (U15). To reach the maximum designed K-value of 1.8 the U15s have to be operated with vacuum gaps down to 3.0 mm. The thirteen-undulator modules are 4 m long and each of them is equipped with a pair of permanent magnet quadrupoles at the two ends, aligned magnetically to the undulator axis. Optical systems and dedicated photon diagnostics are used to check the alignment and improve the K-value calibration. In this talk the main steps of the undulator commissioning will be recalled and a systematic comparison between the magnetic results and the electron and photon based measurements will be reported to highlight achievements and open issues.
	Slides WED01 [13.825 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WED01
About •	paper received ※ 28 August 2019 paper accepted ※ 06 November 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP078	Status of the CompactLight Design Study	738
	G. D’Auria, S. Di Mitri, R.A. Rochow Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy M. Aicheler HIP, University of Helsinki, Finland A. Aksoy Ankara University Institute of Accelerator Technologies, Golbasi, Turkey D. Alesini, M. Bellaveglia, B. Buonomo, F. Cardelli, M. Croia, M. Diomede, M. Ferrario, A. Gallo, A. Giribono, L. Piersanti, J. Scifo, B. Spataro, C. Vaccarezza INFN/LNF, Frascati, Italy R. Apsimon, G. Burt, A. Castilla Cockcroft Institute, Lancaster University, Lancaster, United Kingdom J.M. Arnesano, F. Bosco, L. Ficcadenti, A. Mostacci, L. Palumbo Sapienza University of Rome, Rome, Italy A. Bernhard, J. Gethmann KIT, Karlsruhe, Germany M. Calvi, T. Schmidt, K. Zhang PSI, Villigen PSI, Switzerland H.M. Castañeda Cortés, J.A. Clarke, D.J. Dunning, N. Thompson STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom A.W. Cross, L. Zhang USTRAT/SUPA, Glasgow, United Kingdom G. Dattoli, F. Nguyen, A. Petralia ENEA C.R. Frascati, Frascati (Roma), Italy R.T. Dowd, D. Zhu AS - ANSTO, Clayton, Australia D. Esperante Pereira, J. Fuster, D. Gonzalez-Iglesias IFIC, Valencia, Spain W. Fang SINAP, Shanghai, People’s Republic of China A. Faus-Golfe, Y. Han LAL, Orsay, France E.N. Gazis, N. Gazis National Technical University of Athens, Zografou, Greece R. Geometrante, M. Kokole KYMA, Trieste, Italy B. Gimeno UVEG, Burjasot (Valencia), Spain V.A. Goryashko, M. Jacewicz, R.J.M.Y. Ruber Uppsala University, Uppsala, Sweden R. Hoekstra ARCNL, Amsterdam, The Netherlands X.J.A. Janssen, J.M.A. Priem VDL ETG, Eindhoven, The Netherlands A. Latina, X. Liu, C. Rossi, D. Schulte, S. Stapnes, X.W. Wu, W. Wuensch CERN, Geneva, Switzerland O.J. Luiten, P.H.A. Mutsaers, X.F.D. Stragier TUE, Eindhoven, The Netherlands J. Marcos, E. Marín, R. Muñoz Horta, F. Pérez ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain Z. Nergiz Ankara University, Faculty of Sciences, Ankara, Turkey L.J.R. Nix University of Strathclyde, Glasgow, United Kingdom E. Tanke, E. Trachnas ESS, Lund, Sweden G. Taylor The University of Melbourne, Melbourne, Victoria, Australia
	Funding: This project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement No. 777431. CompactLight (XLS) is an International Collaboration of 24 partners and 5 third parties, funded by the European Union through the Horizon 2020 Research and Innovation Programme. The main goal of the project, which started in January 2018 with a duration of 36 months, is the design of an hard X-ray FEL facility beyond today’s state of the art, using the latest concepts for bright electron photo-injectors, high-gradient accelerating structures, and innovative short-period undulators. The specifications of the facility and the parameters of the future FEL are driven by the demands of potential users and the associated science cases. In this paper we will give an overview on the ongoing activities and the major results achieved until now.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP078
About •	paper received ※ 19 August 2019 paper accepted ※ 29 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP085	Status of Athos, the Soft X-Ray FEL Line of SwissFEL	753
	R. Ganter, G. Aeppli, A. Al Haddad, J. Alex, C. Arrell, V.R. Arsov, S. Bettoni, C. Bostedt, H.-H. Braun, M. Calvi, T. Celcer, P. Craievich, R. Follath, F. Frei, N. Gaiffi, Z.G. Geng, C.H. Gough, M. Huppert, R. Ischebeck, H. Jöhri, P.N. Juranič, B. Keil, F. Löhl, F. Marcellini, G. Marinkovic, G.L. Orlandi, C. Ozkan Loch, M. Paraliev, L. Patthey, M. Pedrozzi, C. Pradervand, E. Prat, S. Reiche, T. Schietinger, T. Schmidt, K. Schnorr, C. Svetina, A. Trisorio, C. Vicario, D. Voulot, U.H. Wagner, A.C. Zandonella PSI, Villigen PSI, Switzerland
	The Athos line will cover the photon energy range from 250 to 1900 eV and will operate in parallel to the hard X-ray line Aramis of SwissFEL. The paper will describe the current layout of the Athos FEL line starting from the fast kicker magnet followed by the dogleg transfer line, the small linac and the 16 APPLE undulators. From there the photon beam passes through the photonics front end and the beamline optics before reaching the experimental stations AMO and FURKA. The focus of this contribution will be on the two bunch operation commissioning (two bunches in the same RF macropulse), which started in 2018, and the characterization of the major components like the APPLE X undulator UE38, the CHIC chicane and the dechirper. The Athos installation inside the tunnel is alternating with Aramis FEL user operation and the first lasing is planned for winter 2019 / 2020.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP085
About •	paper received ※ 30 July 2019 paper accepted ※ 28 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Operational Model of the Athos Undulator Beamline

538

C. Kittel, M. Calvi, X. Liang, T. Schmidt
PSI, Villigen PSI, Switzerland
N.J. Sammut
University of Malta, Information and Communication Technology, Msida, Malta

Athos, the new Soft X-ray beamline of SwissFEL, operates 16 Apple X undulators and 15 compact chicanes to implement novel lasing schemes. With the data available after the end of the magnetic measurement campaign (middle 2020), a self-consistent set of equations will be used to summarise all the relevant properties of those devices to start their commissioning. The analytical approach planned will be discussed in great detail and tested with the preliminary experimental data available. Finally, the accuracy of this approach will be evaluated and critically compared to the requirements of the new FEL beamline.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP097

About •

paper received ※ 27 August 2019 paper accepted ※ 28 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP098

Advanced Operational Models of the Apple X Undulator

541

X. Liang, M. Calvi, C. Kittel, T. Schmidt
PSI, Villigen PSI, Switzerland
N.J. Sammut
University of Malta, Information and Communication Technology, Msida, Malta

Athos is a new soft X-ray beamline at SwissFEL, where the Apple X type undulators will be equipped. These devices are flexible to produce light in different polarization modes. An adequate magnetic field model is required for the operation of undulator. The undulator deflection parameter K and its gradient are calculated starting from the Fourier series of the magnetic field. In the classical parallel and anti-parallel operational modes - respectively elliptical and linear modes, the variation of the magnetic field as well as its parameters are evaluated by computer modeling. The results are compared to the magnetic measurements of the first Apple X prototype.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP098

About •

paper received ※ 27 August 2019 paper accepted ※ 29 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WED01

Experience with Short-Period, Small Gap Undulators at the SwissFEL Aramis Beamline

564

T. Schmidt, M. Aiba, A.D. Alarcon, C. Arrell, S. Bettoni, M. Calvi, A. Cassar, E. Ferrari, R. Follath, R. Ganter, N. Hiller, P.N. Juranič, C. Kittel, F. Löhl, E. Prat, S. Reiche, T. Schietinger, D. Voulot, U.H. Wagner
PSI, Villigen PSI, Switzerland
N.J. Sammut
University of Malta, Faculty of Engineering, Msida, Malta

The SwissFEL Aramis beamline provides hard X-ray FEL radiation down to 1 Angström with 5.8 GeV and short period, 15 mm, in-vacuum undulators (U15). To reach the maximum designed K-value of 1.8 the U15s have to be operated with vacuum gaps down to 3.0 mm. The thirteen-undulator modules are 4 m long and each of them is equipped with a pair of permanent magnet quadrupoles at the two ends, aligned magnetically to the undulator axis. Optical systems and dedicated photon diagnostics are used to check the alignment and improve the K-value calibration. In this talk the main steps of the undulator commissioning will be recalled and a systematic comparison between the magnetic results and the electron and photon based measurements will be reported to highlight achievements and open issues.

Slides WED01 [13.825 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WED01

About •

paper received ※ 28 August 2019 paper accepted ※ 06 November 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP078

Status of the CompactLight Design Study

738

G. D’Auria, S. Di Mitri, R.A. Rochow
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
M. Aicheler
HIP, University of Helsinki, Finland
A. Aksoy
Ankara University Institute of Accelerator Technologies, Golbasi, Turkey
D. Alesini, M. Bellaveglia, B. Buonomo, F. Cardelli, M. Croia, M. Diomede, M. Ferrario, A. Gallo, A. Giribono, L. Piersanti, J. Scifo, B. Spataro, C. Vaccarezza
INFN/LNF, Frascati, Italy
R. Apsimon, G. Burt, A. Castilla
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
J.M. Arnesano, F. Bosco, L. Ficcadenti, A. Mostacci, L. Palumbo
Sapienza University of Rome, Rome, Italy
A. Bernhard, J. Gethmann
KIT, Karlsruhe, Germany
M. Calvi, T. Schmidt, K. Zhang
PSI, Villigen PSI, Switzerland
H.M. Castañeda Cortés, J.A. Clarke, D.J. Dunning, N. Thompson
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
A.W. Cross, L. Zhang
USTRAT/SUPA, Glasgow, United Kingdom
G. Dattoli, F. Nguyen, A. Petralia
ENEA C.R. Frascati, Frascati (Roma), Italy
R.T. Dowd, D. Zhu
AS - ANSTO, Clayton, Australia
D. Esperante Pereira, J. Fuster, D. Gonzalez-Iglesias
IFIC, Valencia, Spain
W. Fang
SINAP, Shanghai, People’s Republic of China
A. Faus-Golfe, Y. Han
LAL, Orsay, France
E.N. Gazis, N. Gazis
National Technical University of Athens, Zografou, Greece
R. Geometrante, M. Kokole
KYMA, Trieste, Italy
B. Gimeno
UVEG, Burjasot (Valencia), Spain
V.A. Goryashko, M. Jacewicz, R.J.M.Y. Ruber
Uppsala University, Uppsala, Sweden
R. Hoekstra
ARCNL, Amsterdam, The Netherlands
X.J.A. Janssen, J.M.A. Priem
VDL ETG, Eindhoven, The Netherlands
A. Latina, X. Liu, C. Rossi, D. Schulte, S. Stapnes, X.W. Wu, W. Wuensch
CERN, Geneva, Switzerland
O.J. Luiten, P.H.A. Mutsaers, X.F.D. Stragier
TUE, Eindhoven, The Netherlands
J. Marcos, E. Marín, R. Muñoz Horta, F. Pérez
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
Z. Nergiz
Ankara University, Faculty of Sciences, Ankara, Turkey
L.J.R. Nix
University of Strathclyde, Glasgow, United Kingdom
E. Tanke, E. Trachnas
ESS, Lund, Sweden
G. Taylor
The University of Melbourne, Melbourne, Victoria, Australia

Funding: This project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement No. 777431.
CompactLight (XLS) is an International Collaboration of 24 partners and 5 third parties, funded by the European Union through the Horizon 2020 Research and Innovation Programme. The main goal of the project, which started in January 2018 with a duration of 36 months, is the design of an hard X-ray FEL facility beyond today’s state of the art, using the latest concepts for bright electron photo-injectors, high-gradient accelerating structures, and innovative short-period undulators. The specifications of the facility and the parameters of the future FEL are driven by the demands of potential users and the associated science cases. In this paper we will give an overview on the ongoing activities and the major results achieved until now.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP078

About •

paper received ※ 19 August 2019 paper accepted ※ 29 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP085

Status of Athos, the Soft X-Ray FEL Line of SwissFEL

753

R. Ganter, G. Aeppli, A. Al Haddad, J. Alex, C. Arrell, V.R. Arsov, S. Bettoni, C. Bostedt, H.-H. Braun, M. Calvi, T. Celcer, P. Craievich, R. Follath, F. Frei, N. Gaiffi, Z.G. Geng, C.H. Gough, M. Huppert, R. Ischebeck, H. Jöhri, P.N. Juranič, B. Keil, F. Löhl, F. Marcellini, G. Marinkovic, G.L. Orlandi, C. Ozkan Loch, M. Paraliev, L. Patthey, M. Pedrozzi, C. Pradervand, E. Prat, S. Reiche, T. Schietinger, T. Schmidt, K. Schnorr, C. Svetina, A. Trisorio, C. Vicario, D. Voulot, U.H. Wagner, A.C. Zandonella
PSI, Villigen PSI, Switzerland

The Athos line will cover the photon energy range from 250 to 1900 eV and will operate in parallel to the hard X-ray line Aramis of SwissFEL. The paper will describe the current layout of the Athos FEL line starting from the fast kicker magnet followed by the dogleg transfer line, the small linac and the 16 APPLE undulators. From there the photon beam passes through the photonics front end and the beamline optics before reaching the experimental stations AMO and FURKA. The focus of this contribution will be on the two bunch operation commissioning (two bunches in the same RF macropulse), which started in 2018, and the characterization of the major components like the APPLE X undulator UE38, the CHIC chicane and the dechirper. The Athos installation inside the tunnel is alternating with Aramis FEL user operation and the first lasing is planned for winter 2019 / 2020.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP085

About •

paper received ※ 30 July 2019 paper accepted ※ 28 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)