Author: Petrov, I.
Paper Title Page
TUA04 Harmonic Lasing Experiment at the European XFEL 29
 
  • E. Schneidmiller, F. Brinker, W. Decking, M.W. Guetg, S. Liu, D. Nölle, M. Scholz, M.V. Yurkov, I. Zagorodnov
    DESY, Hamburg, Germany
  • G. Geloni, N. Gerasimova, J. Grünert, S. Karabekyan, N.G. Kujala, J. Laksman, Y. Li, J. Liu, Th. Maltezopoulos, I. Petrov, L. Samoylova, S. Serkez, H. Sinn, F. Wolff-Fabris
    EuXFEL, Hamburg, Germany
 
  Harmonic lasing is an opportunity to extend the photon energy range of existing and planned X-ray FEL user facilities. Contrary to nonlinear harmonic generation, harmonic lasing can provide a much more intense, stable, and narrow-band FEL beam. Another interesting application is Harmonic Lasing Self-Seeding (HLSS) that allows to improve the longitudinal coherence and spectral power of a Self-Amplified Spontaneous Emission (SASE) FEL. This concept was successfully tested at FLASH in the range of 4.5 - 15 nm and at PAL XFEL at 1 nm. In this contribution we present recent results from the European XFEL where we successfully demonstrated operation of HLSS FEL at 5.9 Angstrom and 2.8 Angstrom, in the latter case obtaining both 3rd and 5th harmonic lasing.  
slides icon Slides TUA04 [1.174 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUA04  
About • paper received ※ 20 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP058 First Characterization of the Photon Beam at the European XFEL in July, 2017 180
 
  • V. Balandin, B. Beutner, F. Brinker, W. Decking, M. Dohlus, L. Fröhlich, U. Jastrow, R. Kammering, T. Limberg, D. Nölle, M. Scholz, A.A. Sorokin, K.I. Tiedtke, M.V. Yurkov, I. Zagorodnov
    DESY, Hamburg, Germany
  • U. Boesenberg, W. Freund, J. Grünert, A. Koch, N.G. Kujala, J. Liu, Th. Maltezopoulos, M. Messerschmidt, I. Petrov, L. Samoylova, H. Sinn
    EuXFEL, Schenefeld, Germany
 
  North branch of the European XFEL, SASE1, produced first light on May 3rd, 2017, and XFEL operation has been gradually improved then. First characterization of the photon beam has been performed in July / August 2017, just before an official starting date of user experiments (September 1st, 2017). Energy of the electron beam was 14 GeV, bunch charge was 500 pC, photon energy was 9.3 keV. With photon diagnostics available at that time (X-ray gas monitor (XGM) and FEL imager) we measured the gain curve and traced evolution of the FEL radiation mode along the undulator. An important conclusion is that experimental results demonstrate reasonable agreement with baseline parameters. Developed techniques of the photon beam characterization also provided solid base for identification of the problems and means for improving SASE FEL tuning and operation.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP058  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP079 Effect of Heat Load on Cryo-Cooled Monochromators at the European X-Ray Free-Electron Laser: Simulations and First Experimental Observations 502
 
  • I. Petrov, U. Boesenberg, M. Dommach, J. Eidam, J. Hallmann, K. Kazarian, C. Kim, W. Lu, A. Madsen, J. Möller, M. Reiser, L. Samoylova, R. Shayduk, H. Sinn, V. Sleziona, A. Zozulya
    EuXFEL, Schenefeld, Germany
  • J.W.J. Anton, S.P. Kearney, D. Shu
    ANL, Lemont, Illinois, USA
  • X. Dong
    SINAP, Shanghai, People’s Republic of China
  • X. Dong
    SARI-CAS, Pudong, Shanghai, People’s Republic of China
 
  European XFEL (EuXFEL) generates high-intensity ultra-short pulses at MHz repetition rate. At hard X-ray instruments, cryo-cooled silicon monochromators are used to reduce pulse bandwidth. Here, first experimental observations during commissioning of a cryo-cooled monochromator at Materials Imaging and Dynamics (MID) instrument are presented and compared with heat flow simulations. A thermal relaxation time is estimated and compared with arrival time interval between pulses. This provides the repetition rate tolerable for stable operation of monochromator.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP079  
About • paper received ※ 19 August 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)