FEL2019 - List of Authors (Loisch, G.)

Paper	Title	Page
TUP002	Progress in Preparing a Proof-of-Principle Experiment for THz SASE FEL at PITZ	41
	X. Li, P. Boonpornprasert, Y. Chen, G.Z. Georgiev, J.D. Good, M. Groß, P.W. Huang, I.I. Isaev, C. Koschitzki, M. Krasilnikov, S. Lal, O. Lishilin, G. Loisch, D. Melkumyan, R. Niemczyk, A. Oppelt, H.J. Qian, H. Shaker, G. Shu, F. Stephan, G. Vashchenko DESY Zeuthen, Zeuthen, Germany
	A proof-of-princle experiment for a THz SASE FEL is undergoing preparation at the Photo Injector Test facility at DESY in Zeuthen (PITZ), as a prototype THz source for pump-probe experiments at the European XFEL, which could potentially provide up to mJ/pulse THz radiation while maintaining the identical pulse train structure as the XFEL pulses. In the proof-of-principle experiment, LCLS-I undulators will be installed to generate SASE radiation in the THz range of 3-5 THz from electron bunches of 16-22 MeV/c. One key design is to obtain the peak current of nearly 200 A from the heavily charged bunches of a few nC. In this paper, we report our simulation results on the optimization of the space charge dominated beam in the photo injector and the following transport line with two cathode laser setups. Experimental results based on a short Gaussian laser will also be discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP002
About •	paper received ※ 20 August 2019 paper accepted ※ 27 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP050	Status of Chirped Pulse Laser Shaping for the PITZ Photoinjector	437
	C. Koschitzki, Y. Chen, J.D. Good, M. Groß, M. Krasilnikov, G. Loisch, R. Niemczyk, F. Stephan DESY Zeuthen, Zeuthen, Germany E. Khazanov, S. Mironov IAP/RAS, Nizhny Novgorod, Russia T. Lang, L. Winkelmann DESY, Hamburg, Germany
	The beam emittance at FEL facilities like European XFEL and FLASH is dominated by the emittance sources in the electron injector. Shaping of the laser pulses that are employed to release electrons from the cathode of a photo injector, was shown in theory to allow improved beam emittance starting from the electron emission process. At the photo injector test facility at DESY in Zeuthen (PITZ) a laser system capable of controlling the temporal and spatial profile of laser pulses is being set up to demonstrate the predicted emittance reduction experimentally. The presentation will show its current capabilities to provide temporally and spatially shaped laser pulses from a pulse shaper operating at infrared (IR) wavelengths. Furthermore, results from a shape preserving conversion into fourth harmonic ultra-violet (UV), as needed for the photo emission process, will be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP050
About •	paper received ※ 21 August 2019 paper accepted ※ 17 September 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP051	PITZ Experimental Optimization for the Aimed Cathode Gradient of a Superconducting CW RF Gun	440
	M. Krasilnikov, P. Boonpornprasert, Y. Chen, G.Z. Georgiev, J.D. Good, M. Groß, P.W. Huang, I.I. Isaev, C. Koschitzki, S. Lal, X. Li, O. Lishilin, G. Loisch, D. Melkumyan, R. Niemczyk, A. Oppelt, H.J. Qian, H. Shaker, G. Shu, F. Stephan, G. Vashchenko DESY Zeuthen, Zeuthen, Germany M. Dohlus, E. Vogel DESY, Hamburg, Germany
	A continuous wave (CW) mode operation of the European X-ray Free-Electron Laser (XFEL) is under considerations for a future upgrade. Therefore, a superconducting radio frequency (SRF) CW gun is under experimental development at DESY in Hamburg. Beam dynamics simulations for this setup have been done assuming 100 pC bunch charge and a maximum electric field at the photocathode of 40 MV/m. Experimental studies for these parameters using a normal conducting RF photogun have been performed at the Photo Injector Test facility at DESY in Zeuthen (PITZ). The beam transverse emittance was minimized by optimizing the main photo injector parameters in order to demonstrate the feasibility of generating electron beams with a beam quality required for successful CW operation of the European XFEL for conditions similar to the SRF gun setup.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP051
About •	paper received ※ 20 August 2019 paper accepted ※ 27 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP052	Simulation Studies on the Saturated Emission at PITZ	444
	X. Li, P. Boonpornprasert, Y. Chen, J.D. Good, M. Groß, I.I. Isaev, C. Koschitzki, M. Krasilnikov, S. Lal, O. Lishilin, G. Loisch, D. Melkumyan, R. Niemczyk, A. Oppelt, H.J. Qian, H. Shaker, G. Shu, F. Stephan, G. Vashchenko DESY Zeuthen, Zeuthen, Germany
	In this paper we report our consideration and simulation on the space charge dominated emission in the L-band photocathode RF gun at the Photo Injector Test facility at DESY in Zeuthen (PITZ). It has been found that the emission curve, which relates the extracted and accelerated bunch charge after the gun to the laser energy, doesn’t agree very well with Astra simulations when the emission is nearly or fully saturated. Previous studies with a core-halo model for a better fit of the experimentally measured laser transverse profile as well as with an improved transient emission model have resulted in a better agreement between experimental data and simulation. A 3D FFT space charge solver including mirror charge and binned energy/momentum has been built, which also allows more emission mechanisms to be included in the future. In this paper, the energy spread during emission was preliminarily analyzed. Experimentally measured emission curves were compared with simulation, showing the effect of the inhomogeneity of the laser on the emission and beam parameters.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP052
About •	paper received ※ 20 August 2019 paper accepted ※ 27 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP007	Frequency-Detuning Dependent Transient Coaxial RF Coupler Kick	599
	Y. Chen, J.D. Good, M. Groß, P.W. Huang, I.I. Isaev, C. Koschitzki, M. Krasilnikov, S. Lal, X. Li, O. Lishilin, G. Loisch, D. Melkumyan, R. Niemczyk, A. Oppelt, H.J. Qian, H. Shaker, G. Shu, F. Stephan, G. Vashchenko DESY Zeuthen, Zeuthen, Germany F. Brinker, W. Decking DESY, Hamburg, Germany
	We model and characterize a transverse kick which results from the coaxial RF coupler in the L-band RF gun at the Photo Injector Test Facility at DESY in Zeuthen (PITZ). The RF pulse is typically 600 µs long and used to produce a train of up to 2700 electron bunches. The kick is transient and found to be dependent on the detuning of the resonance frequency of the gun cavity. The frequency detuning within the RF macro-pulse results in a variation in the kick strength along the pulse. This leads to a downstream orbit and size change of individual bunches within the train. Using 3D RF field distributions calculated at detuned frequencies of the cavity, particle tracking simulations are performed to simulate the transient kick onto the bunch train. Given a drift distance, the orbit and size change along a train of fixed length is estimated. Systematic measurements of the kick have meanwhile been carried out. The temperature of the cooling water for the gun is tuned allowing detailed characterization of the frequency detuning within the RF pulse, and thereby measurements of the kick under conditions of practical interest. Experimental findings and simulation results will be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP007
About •	paper received ※ 13 August 2019 paper accepted ※ 27 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Progress in Preparing a Proof-of-Principle Experiment for THz SASE FEL at PITZ

41

X. Li, P. Boonpornprasert, Y. Chen, G.Z. Georgiev, J.D. Good, M. Groß, P.W. Huang, I.I. Isaev, C. Koschitzki, M. Krasilnikov, S. Lal, O. Lishilin, G. Loisch, D. Melkumyan, R. Niemczyk, A. Oppelt, H.J. Qian, H. Shaker, G. Shu, F. Stephan, G. Vashchenko
DESY Zeuthen, Zeuthen, Germany

A proof-of-princle experiment for a THz SASE FEL is undergoing preparation at the Photo Injector Test facility at DESY in Zeuthen (PITZ), as a prototype THz source for pump-probe experiments at the European XFEL, which could potentially provide up to mJ/pulse THz radiation while maintaining the identical pulse train structure as the XFEL pulses. In the proof-of-principle experiment, LCLS-I undulators will be installed to generate SASE radiation in the THz range of 3-5 THz from electron bunches of 16-22 MeV/c. One key design is to obtain the peak current of nearly 200 A from the heavily charged bunches of a few nC. In this paper, we report our simulation results on the optimization of the space charge dominated beam in the photo injector and the following transport line with two cathode laser setups. Experimental results based on a short Gaussian laser will also be discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP002

About •

paper received ※ 20 August 2019 paper accepted ※ 27 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP050

Status of Chirped Pulse Laser Shaping for the PITZ Photoinjector

437

C. Koschitzki, Y. Chen, J.D. Good, M. Groß, M. Krasilnikov, G. Loisch, R. Niemczyk, F. Stephan
DESY Zeuthen, Zeuthen, Germany
E. Khazanov, S. Mironov
IAP/RAS, Nizhny Novgorod, Russia
T. Lang, L. Winkelmann
DESY, Hamburg, Germany

The beam emittance at FEL facilities like European XFEL and FLASH is dominated by the emittance sources in the electron injector. Shaping of the laser pulses that are employed to release electrons from the cathode of a photo injector, was shown in theory to allow improved beam emittance starting from the electron emission process. At the photo injector test facility at DESY in Zeuthen (PITZ) a laser system capable of controlling the temporal and spatial profile of laser pulses is being set up to demonstrate the predicted emittance reduction experimentally. The presentation will show its current capabilities to provide temporally and spatially shaped laser pulses from a pulse shaper operating at infrared (IR) wavelengths. Furthermore, results from a shape preserving conversion into fourth harmonic ultra-violet (UV), as needed for the photo emission process, will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP050

About •

paper received ※ 21 August 2019 paper accepted ※ 17 September 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP051

PITZ Experimental Optimization for the Aimed Cathode Gradient of a Superconducting CW RF Gun

440

M. Krasilnikov, P. Boonpornprasert, Y. Chen, G.Z. Georgiev, J.D. Good, M. Groß, P.W. Huang, I.I. Isaev, C. Koschitzki, S. Lal, X. Li, O. Lishilin, G. Loisch, D. Melkumyan, R. Niemczyk, A. Oppelt, H.J. Qian, H. Shaker, G. Shu, F. Stephan, G. Vashchenko
DESY Zeuthen, Zeuthen, Germany
M. Dohlus, E. Vogel
DESY, Hamburg, Germany

A continuous wave (CW) mode operation of the European X-ray Free-Electron Laser (XFEL) is under considerations for a future upgrade. Therefore, a superconducting radio frequency (SRF) CW gun is under experimental development at DESY in Hamburg. Beam dynamics simulations for this setup have been done assuming 100 pC bunch charge and a maximum electric field at the photocathode of 40 MV/m. Experimental studies for these parameters using a normal conducting RF photogun have been performed at the Photo Injector Test facility at DESY in Zeuthen (PITZ). The beam transverse emittance was minimized by optimizing the main photo injector parameters in order to demonstrate the feasibility of generating electron beams with a beam quality required for successful CW operation of the European XFEL for conditions similar to the SRF gun setup.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP051

About •

paper received ※ 20 August 2019 paper accepted ※ 27 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP052

Simulation Studies on the Saturated Emission at PITZ

444

X. Li, P. Boonpornprasert, Y. Chen, J.D. Good, M. Groß, I.I. Isaev, C. Koschitzki, M. Krasilnikov, S. Lal, O. Lishilin, G. Loisch, D. Melkumyan, R. Niemczyk, A. Oppelt, H.J. Qian, H. Shaker, G. Shu, F. Stephan, G. Vashchenko
DESY Zeuthen, Zeuthen, Germany

In this paper we report our consideration and simulation on the space charge dominated emission in the L-band photocathode RF gun at the Photo Injector Test facility at DESY in Zeuthen (PITZ). It has been found that the emission curve, which relates the extracted and accelerated bunch charge after the gun to the laser energy, doesn’t agree very well with Astra simulations when the emission is nearly or fully saturated. Previous studies with a core-halo model for a better fit of the experimentally measured laser transverse profile as well as with an improved transient emission model have resulted in a better agreement between experimental data and simulation. A 3D FFT space charge solver including mirror charge and binned energy/momentum has been built, which also allows more emission mechanisms to be included in the future. In this paper, the energy spread during emission was preliminarily analyzed. Experimentally measured emission curves were compared with simulation, showing the effect of the inhomogeneity of the laser on the emission and beam parameters.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP052

About •

paper received ※ 20 August 2019 paper accepted ※ 27 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP007

Frequency-Detuning Dependent Transient Coaxial RF Coupler Kick

599

Y. Chen, J.D. Good, M. Groß, P.W. Huang, I.I. Isaev, C. Koschitzki, M. Krasilnikov, S. Lal, X. Li, O. Lishilin, G. Loisch, D. Melkumyan, R. Niemczyk, A. Oppelt, H.J. Qian, H. Shaker, G. Shu, F. Stephan, G. Vashchenko
DESY Zeuthen, Zeuthen, Germany
F. Brinker, W. Decking
DESY, Hamburg, Germany

We model and characterize a transverse kick which results from the coaxial RF coupler in the L-band RF gun at the Photo Injector Test Facility at DESY in Zeuthen (PITZ). The RF pulse is typically 600 µs long and used to produce a train of up to 2700 electron bunches. The kick is transient and found to be dependent on the detuning of the resonance frequency of the gun cavity. The frequency detuning within the RF macro-pulse results in a variation in the kick strength along the pulse. This leads to a downstream orbit and size change of individual bunches within the train. Using 3D RF field distributions calculated at detuned frequencies of the cavity, particle tracking simulations are performed to simulate the transient kick onto the bunch train. Given a drift distance, the orbit and size change along a train of fixed length is estimated. Systematic measurements of the kick have meanwhile been carried out. The temperature of the cooling water for the gun is tuned allowing detailed characterization of the frequency detuning within the RF pulse, and thereby measurements of the kick under conditions of practical interest. Experimental findings and simulation results will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP007

About •

paper received ※ 13 August 2019 paper accepted ※ 27 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)