Paper | Title | Page |
---|---|---|
MOP061 | X-ray Regenerative Amplifier Free-Electron Laser Concepts for LCLS-II | 192 |
|
||
High-brightness electron beams that will drive the next generation of high-repetition rate X-ray FELs allow for the possibility of optical cavity-based feedback. One such cavity-based FEL concept is the Regenerative Amplifier Free-Electron Laser (RAFEL). This paper examines the design and performance of possible RAFEL configurations for LCLS-II. The results are primarily based on high-fidelity numerical particle simulations that show the production of high brightness, high average power, fully coherent, and stable X-ray pulses at LCLS-II using both the fundamental and harmonic FEL interactions. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-MOP061 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUB01 | Seeding Experiments and Seeding Options for LCLS II | 219 |
|
||
We discuss the present status of FEL seeding experiments toward the soft x-ray regime and on-going studies on possible seeding options for the high repetition soft x-ray line at LCLS-II. The seeding schemes include self-seeding, cascaded HGHG, and EEHG to reach the 1-2 nm regime with the highest possible brightness and minimal spectral pedestal. We describe relevant figures of merit, performance expectations, and potential issues. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-TUB01 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUB02 |
Fresh Slice Self-Seeding and Fresh Slice Harmonic Lasing at LCLS | |
|
||
We present results from the successful demonstration of fresh slice self-seeding at the Linac Coherent Light Source (LCLS).* The performance is compared with SASE and regular self-seeding at photon energy of 5.5 keV, resulting in a relative average brightness increase of a factor of 12 and a factor of 2 respectively. Following this proof-of-principle we discuss the forthcoming plans to use the same technique** for fresh slice harmonic lasing in an upcoming experiment. The demonstration of fresh slice harmonic lasing provides an attractive solution for future XFELs aiming to achieve high efficiency, high brightness X-ray pulses at high photon energies (>12 keV).***
* C. Emma et al., Applied Physics Letters, 110:154101, 2017. ** A. A. Lutman et al., Nature Photonics, 10(11):745-750, 2016. *** C. Emma et al., Phys. Rev. Accel. Beams 20:030701, 2017. |
||
![]() |
Slides TUB02 [10.013 MB] | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEB03 | R&D at SLAC on Nanosecond-Range Multi-MW Systems for Advanced FEL Facilities | 404 |
|
||
Funding: Work supported by US Department of Energy contract DE-AC02-76SF00515 A nanosecond-range, multi-MW system containing TEM mode electrodynamic structures fed by controllable pulsers are needed for (1) fast injection systems in multi-bend achromat upgraded (MBA-U) storage rings and for (2) arrays of FEL beamlines powered by a superconducting linear accelerators operating with MHz-bunch repetition rate. The R&D effort covers both type (1) and (2) layouts. This report discuss the experimental results of several concepts for a generation of the nanosecond range multi MW pulsers. Compression of the initially formed electromagnetic (EM) power is employed for a generation of the nanosecond pulses in all concepts discussed here. A solid-state nonlinear media assists the EM compression. Features of the materials and components used in the design will be presented. The results will be included in the design of the kicker systems for advanced FEL facilities. For example, in the LCLS-II, the nanosecond range pulse allows for distributing closely spaced bunches to multiple undulators allowing experimenters to take advantage of combining different colored x-rays. |
||
![]() |
Slides WEB03 [6.521 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEB03 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |