| Paper |
Title |
Page |
| TUPP120 |
Current Status of the IBA C400 Cyclotron Project for Hadron Therapy
|
1806 |
| |
- Y. Jongen, M. Abs, A. Blondin, W. J.G. M. Kleeven, D. Vandeplassche, S. Zaremba
IBA, Louvain-la-Neuve
- V. Aleksandrov, S. Gurskiy, G. A. Karamysheva, N. Yu. Kazarinov, S. A. Kostromin, N. A. Morozov, E. Samsonov, V. Shevtsov, G. Shirkov, E. Syresin, A. Tuzikov
JINR, Dubna, Moscow Region
|
|
| |
Compact superconducting isochronous cyclotron C400 has been designed at IBA (Belgium) in collaboration with the JINR (Dubna). This cyclotron will be used for radiotherapy with proton, helium or carbon ions. 12C6+ and 4He2+ ions will be accelerated to 400 MeV/u energy and extracted by electrostatic deflector, H2+ ions will be accelerated to the energy 250MeV/u and extracted by stripping. We describe the parameters of the cyclotron, the current status of development work on the cyclotron systems. Reports on the status of the C400 project have been given regularly. Therefore, we will focus on the progress which has been achieved since recent reports in Cyclotron 2007 and EPAC 2006 conferences. The project will be ready to begin construction in the nearest future.
|
|
| THPP065 |
3D Simulation of the Axial Injection Beam Line of DC350 Cyclotron
|
3509 |
| |
- N. Yu. Kazarinov, V. Aleksandrov, V. Shevtsov, A. Tuzikov
JINR, Dubna, Moscow Region
|
|
| |
DC-350 is the novel cyclotron designed in Flerov Laboratory of Nuclear Reaction of Joint Institute for Nuclear Research. It is intended for the nuclear and applied physics experiments. The axial injection channel of the DC-350 cyclotron gives possibility for transportation of the high intensity ion beam from Li to Bi obtained in the superconducting ECR-ion source (SECR). The beam focusing in the beam line after the analyzing bending magnet is provided by solenoidal lenses. The linear and sinusoidal bunchers installed in the vertical part of the channel are used for increasing of the accelerating efficiency. The 3D simulation results of the focusing and bunching systems of the axial injection beam line are presented.
|
|