| Paper |
Title |
Page |
| THPC146 |
Beam Halo Monitor Using Diamond Detectors for XFEL/SPring-8
|
3330 |
| |
- H. Aoyagi, Y. Asano, T. Bizen, K. Fukami, N. Nariyama
JASRI/SPring-8, Hyogo-ken
- T. Itoga, H. Kitamura, T. Tanaka
RIKEN/SPring-8, Hyogo
|
|
| |
The construction of the XFEL facility at SPring-8 has been started. We have been developing a halo monitor as an interlock device for protection of undulator permanent magnets against radiation damage. When permanent magnets are irradiated with a halo part of 8GeV electron beam, magnetic fields are degraded permanently and laser oscillation is weakened. Therefore, the interlock device is required during machine operation. Diamond detector, which operates in photoconductive mode, is good candidate for electron beam sensor. The beam test of the diamond detector head has been carried out at the beam dump of the SPring-8 booster synchrotron. Minimum number of injected electron was about 1·105 /pulse, and we observed the pulse height of 0.1V having the pulse length of 0.6nsec FWHM without a preamplifier. The linearity of output signal on injected beam was also demonstrated. The beam halo monitor equipped with the diamond detectors is under manufacturing. The design and feasibility tests will be presented in this conference.
|
|