| Paper |
Title |
Page |
| WEPC016 |
Operation Status and Performances Upgrade on SOLEIL Storage Ring
|
2022 |
| |
- J.-M. Filhol, J. C. Besson, F. Bouvet, P. Brunelle, L. Cassinari, M.-E. Couprie, J.-C. Denard, C. Herbeaux, J.-F. Lamarre, J.-P. Lavieville, P. Lebasque, M.-P. Level, A. Loulergue, P. Marchand, A. Nadji, L. S. Nadolski, R. Nagaoka, M.-A. Tordeux
SOLEIL, Gif-sur-Yvette
|
|
| |
SOLEIL is the French 2.75 GeV third generation synchrotron light source delivering beam to users since January 2007. Beginning of 2008 up to 13 beam-lines are taking beam, 7 from insertion devices (IDs), 2 from IR ports, and 4 from dipole ports, and 6 of them are open to external Users. Users have a full control of their IDs. With a 300 mA stored beam current in multi-bunch filling pattern, and position stability in the few micron range, the main target performances have been reached. A beam of 50 mA in 8 bunches was delivered to users for the first time in December 2007 for time structure experiments. Operation and performance status will first be given, namely subsystem behaviour (RF, vacuum, …), beam optics, orbit stability, beam lifetime, and operation statistics. Then the main objectives for 2008 will be reviewed: delivery of 4000 hours of user beam time, installation and commissioning of a second cryomodule for reaching the 500 mA current target, construction and installation of 6 new IDs leading to a total number of 17, improvement of the orbit stability with a fast orbit feedback complementary to the slow orbit one, and preparation for top-up operation.
|
|
| THPC124 |
The Manufacturing and Tests of The New Vertical Feedback Stripline at Soleil
|
3275 |
| |
- C. Mariette, J.-C. Denard, R. Nagaoka
SOLEIL, Gif-sur-Yvette
|
|
| |
This paper describes the development of the kicker striplines for the bunch-by-bunch transverse instability feedback system at Soleil. A careful design of the striplines and of their vacuum feedthroughs was aimed at maximizing the effectiveness of the excitation power and minimizing the power taken from the beam. The excitation effectiveness improves with the shunt impedance. But, simultaneously, the beam impedance should be made as small as possible. We also found useful to estimate the temperature of the feedthroughs at high beam currents, especially on the ceramic-to-metal seals. We also report on the difficulties encountered with obtaining good feedthroughs.
|
|
| FRXBGM01 |
Impedance Computation and Measurement in Modern Storage Rings
|
3728 |
| |
- R. Nagaoka
SOLEIL, Gif-sur-Yvette
|
|
| |
Recent progress in the evaluation of machine impedance and instability thresholds will be reviewed, and comparisons made between measurements and predicted impedance in recently commissioned storage rings.
|
|
|
Slides
|
|