| Paper | Title | Page |
|---|---|---|
| THPP139 | Stainless Steel Vacuum Chambers for the SSRF Storage Ring | 3688 |
|
||
| Stainless steel 316LN plate was adopted as main material for SSRF storage ring vacuum chambers and ante-chamber structure was used just as other 3rd light source. The analysis for the deformation of the chambers under atmospheric pressure and the thermal situation under synchrotron radiation were done with ANASYS program. Many problems on the structure design and fabrication technique were revealed and suitable solving methods were found in the process of development and manufacture of nine chamber prototypes. Deep draw die was used to form the chambers’ figuration. Wire cutting and CNC machining were used to manufacture the main components. The flatness tolerance, straightness tolerance and the deformation of the chambers under atmospheric pressure were all less than 1mm. After annealed in the vacuum furnace at 850℃, the magnetic permeability of welding seal was reduced from 2.5 to 1.02, the residual stress was deleted, and the vacuum performance was improved. Now SSRF vacuum system is being operated very well. The average pressure without beam is about 2.5×10-8 Pa and the average pressure with beam of 3GeV/100mA is about 8×10-7 Pa. |