A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Lawrie, S. R.

Paper Title Page
MOPC143 Multi-beamlet Study of Beam Transport in the ISIS H- Ion Source Analysing Magnet 409
 
  • D. C. Faircloth, S. R. Lawrie, A. P. Letchford, M. E. Westall, M. Whitehead, T. Wood
    STFC/RAL/ISIS, Chilton, Didcot, Oxon
  
  The RAL Front End Test Stand (FETS) is being constructed to demonstrate a chopped H- beam of up to 60 mA at 3 MeV with 50 pps and sufficiently high beam quality for future high-power proton accelerators (HPPA). The existing 90° analysing magnet on the ISIS H- Penning ion source does not perfectly transport the beam after extraction. The present ion source has a 10 mm x 0.6 mm slit extraction aperture. To understand how the beam is transported in the analysing magnet, new ion source aperture plates are manufactured with 5 individual holes instead of a slit. These holes produce separate beamlets that are used to study transport in the sector magnet. This paper details the experiments with the modified aperture plates on the Ion Source Development Rig (ISDR) at ISIS.  
MOPC144 Installation of the Front End Test Stand High Performance H- Ion Source at RAL 412
 
  • D. C. Faircloth, M. H. Bates, S. R. Lawrie, A. P. Letchford, M. Perkins, M. E. Westall, M. Whitehead, P. Wise, T. Wood
    STFC/RAL/ISIS, Chilton, Didcot, Oxon
  • C. Gabor
    STFC/RAL/ASTeC, Chilton, Didcot, Oxon
  • J. K. Pozimski, P. Savage
    Imperial College of Science and Technology, Department of Physics, London
  
  The RAL Front End Test Stand (FETS) is being constructed to demonstrate a chopped H- beam of up to 60 mA at 3 MeV with 50 pps and sufficiently high beam quality for future high-power proton accelerators (HPPA). This paper details the first stage of construction- the installation of the ion source.  
MOPC150 Modifications to the Analysing Magnet in the ISIS Penning Ion Source 427
 
  • S. R. Lawrie, D. C. Faircloth, A. P. Letchford, M. E. Westall, M. Whitehead, T. Wood
    STFC/RAL/ISIS, Chilton, Didcot, Oxon
  • J. K. Pozimski
    STFC/RAL, Chilton, Didcot, Oxon
  
  A full 3D electromagnetic finite element analysis and particle tracking study is undertaken of the ISIS Penning surface plasma ion source using CST Particle Studio 2008. The existing 90° analysing magnet is found to have a magnetic field index of 1.3, causing beam divergence and contributing to beam loss. Different magnet pole piece geometries are modelled and the effect of space charge investigated. Based on this modelling, three new sets of poles are manufactured and tested on the Ion Source Development Rig. The results are presented herein.  
TUPC057 Improving the ISIS Emittance Scanner Software 1185
 
  • S. R. Lawrie, D. C. Faircloth, A. P. Letchford
    STFC/RAL/ISIS, Chilton, Didcot, Oxon
  
  The software to drive the slit-slit emittance scanners at ISIS is re-written in C#. The scanner driver routine is enhanced to improve accuracy, and to allow real-time monitoring of the scanning procedure. A multiple document interface allows quick comparison with other measurements and with data from particle tracking codes. Integrated data processing and emittance calculation removes the need to transfer data between multiple software packages, making experimental work more efficient. A user-friendly and robust interface allows easy scanning and generates publication quality emittance plots for presentations.  
THPP029 Status of the RAL Front End Test Stand 3437
 
  • A. P. Letchford, M. A. Clarke-Gayther, D. C. Faircloth, D. J.S. Findlay, S. R. Lawrie, P. Romano, P. Wise
    STFC/RAL/ISIS, Chilton, Didcot, Oxon
  • S. M.H. Al Sari, S. Jolly, A. Kurup, D. A. Lee, P. Savage
    Imperial College of Science and Technology, Department of Physics, London
  • J. Alonso, R. Enparantza
    Fundación Tekniker, Elbr (Guipuzkoa)
  • J. J. Back
    University of Warwick, Coventry
  • F. J. Bermejo
    Bilbao, Faculty of Science and Technology, Bilbao
  • C. Gabor, D. C. Plostinar
    STFC/RAL/ASTeC, Chilton, Didcot, Oxon
  • J. Lucas
    Elytt Energy, Madrid
  • J. Pasternak, J. K. Pozimski
    STFC/RAL, Chilton, Didcot, Oxon
  
  High power proton accelerators (HPPAs) with beam powers in the several megawatt range have many applications including drivers for spallation neutron sources, neutrino factories, waste transmuters and tritium production facilities. The UK's commitment to the development of the next generation of HPPAs is demonstrated by a test stand being constructed in collaboration between RAL, Imperial College London, the University of Warwick and the Universidad del Pais Vasco, Bilbao. The aim of the RAL Front End Test Stand is to demonstrate that chopped low energy beams of high quality can be produced and is intended to allow generic experiments exploring a variety of operational conditions. This paper describes the current status of the RAL Front End Test Stand.