A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Jansson, A.

Paper Title Page
MOPP090 Incorporating RF into a Muon Helical Cooling Channel 760
 
  • S. A. Kahn, M. Alsharo'a, R. P. Johnson
    Muons, Inc, Batavia
  • D. R. Broemmelsiek, A. Jansson, V. Kashikhin, V. S. Kashikhin, A. L. Klebaner, G. F. Kuznetsov, G. V. Romanov, A. V. Shemyakin, D. Sun, K. Yonehara, A. V. Zlobin
    Fermilab, Batavia, Illinois
  • L. Thorndahl
    CERN, Geneva
 
  A helical cooling channel (HCC) consisting of a pressurized gas absorber imbedded in a magnetic channel that provides solenoidal, helical dipole and helical quadrupole fields has shown considerable promise in providing six-dimensional cooling for muon beams. The energy lost by muons traversing the gas absorber needs to be replaced by inserting RF cavities into the lattice. Replacing the substantial muon energy losses using RF cavities with reasonable gradients will require a significant fraction of the channel length be devoted to RF. However, to provide the maximum phase space cooling and minimal muon losses, the helical channel should have a short period and length. In this paper we shall examine three approaches to include RF cavities into the HCC lattice:
  1. Use higher frequency cavities that can be placed inside the magnetic channel,
  2. Interleave cavities between magnetic coil rings, and
  3. Place banks of RF cavities between segments of HCC channels.
Each of these approaches has positive and negative features that need to be evaluated in selecting the proper concept for including RF into the HCC system.
 
WEPP153 Status of the MANX Muon Cooling Experiment 2844
 
  • K. Yonehara, D. R. Broemmelsiek, M. Hu, A. Jansson, V. Kashikhin, V. S. Kashikhin, M. J. Lamm, M. L. Lopes, V. D. Shiltsev, V. Yarba, M. Yu, A. V. Zlobin
    Fermilab, Batavia, Illinois
  • R. J. Abrams, M. A.C. Cummings, R. P. Johnson, S. A. Kahn, T. J. Roberts
    Muons, Inc, Batavia
 
  MANX is an experiment to prove that effective six-dimensional (6D) muon beam cooling can be achieved a Helical Cooling Channel (HCC) using ionization-cooling with helical and solenoidal magnets in a novel configuration. The aim is to demonstrate that 6D muon beam cooling is understood well enough to plan intense neutrino factories and high-luminosity muon colliders. The experiment consists of the HCC magnets that envelop a liquid helium energy absorber, upstream and downstream instrumentation to measure the particle or beam parameters before and after cooling, and emittance matching sections between the detectors and the HCC. Studies are presented of the effects of detector resolution and magnetic field errors on the beam cooling measurements.