A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Grilli, A. G.

Paper Title Page
TUPC008 Beam Diagnostics with IR Light Emitted by Positron at DAΦNE 1056
 
  • A. Bocci, A. Clozza, A. Drago, A. G. Grilli, A. Marcelli, A. R. Raco, R. S. Sorchetti
    INFN/LNF, Frascati (Roma)
  • A. De Sio, L. Gambicorti, E. Pace
    Università degli Studi di Firenze, Firenze
  • E. P. Emanuele
    Università degli Studi di Firenze, Firenze
  • M. P. Piccinini
    Università Roma Tre, Roma
  • J. P. Piotrowski
    Vigo System Sa, Warsaw
 
  Real-time beam diagnostics is mandatory in accelerators and represents one of the most challenging issues of modern storage rings and future FEL's. Recently, compact mid-IR fast uncooled photo-detectors have been used at DAΦNE to monitor single e- bunches using the SINBAD IR beamline installed on the e- ring*. Electron bunches have a FWHM of 150-300 ps and are separated by 2.7 ns**. Detectors performances are then suitable for a compact and low cost bunch-by-bunch longitudinal diagnostic device. To improve the DAΦNE diagnostic a bending magnet SR port on the e+ ring has been set-up with a HV chamber, a gold-coated plane mirror and a ZnSe window. To collect the SR light and focus radiation on IR detectors allowing the diagnostic of e+ a compact optical system has been installed in air after the window. Here we will present the status of the apparatus, the source characteristics, the optical setup and the complete acquisition system. This IR port will allow comparison in the ns time domain between data collected on both rings, and could be also used to improve DAΦNE diagnostics, i.e., identify and characterize bunch instabilities and/or increase the current in the e+ ring.

*M. Cestelli Guidi et al. J. Opt. Soc. Amer. A 22, 2810 (2005).
**A. Bocci et al. NIM-A, 580, 190 (2007).

 
TUPP027 Electron Energy Dependence of Scrubbing Efficiency to Mitigate E-cloud Formation in Accelerators 1592
 
  • R. Cimino, M. Commisso, T. Demma, A. G. Grilli, P. Liu, M. Pietropaoli, V. Sciarra
    INFN/LNF, Frascati (Roma)
  • V. Baglin
    CERN, Geneva
  • P. Barone, A. Bonanno
    INFN Gruppo di Cosenza, Arcavacata di Rende (Cosenza)
 
  Recently built and planned accelerators, base their ability to reach design parameters, on the capability to reduce Secondary Electron Yield (SEY) during commissioning, hence mitigating the potentially detrimental effects of e-cloud driven machine limitations. This SEY reduction (called "scrubbing"), is due to the fact that the electrons of the cloud, hit the vacuum chamber wall, modifying its surface properties and reducing its SEY. This minimise any disturbing effects of the e-cloud to the beam. "Scrubbing" has been studied only as a function of impinging electron dose. In reality SEY modifications are only studied by bombarding surfaces with 300-500 eV electrons, but no scrubbing dependence on the bombarding electron energy has ever been discussed. The actual energy of the electrons of the cloud hitting the wall in real accelerators has never been measured accurately, while simulations predict very low electron energies (<50 eV). For this reason and given the peculiar behaviour observed for low energy electrons*, we decided to study this dependence accurately. Here we present some preliminary results discussing eventual implications to machine commissioning procedures.

*R. Cimino et al. Phys. Rev. Lett 93, 14801 (2004).