| Paper | Title | Page |
|---|---|---|
| TUPC154 | CERN PSB Beam Tests of CNAO Synchrotron's Digital LLRF | 1431 |
|
||
| The Italian National Centre for Oncological hAdrontherapy (CNAO), in its final construction phase, uses proton and carbon ion beams to treat patients affected by solid tumours. At the heart of CNAO is a 78-meter circumference synchrotron that accelerates particles to up to 400 MeV/u. The synchrotron relies on a digital LLRF system based upon Digital Signal Processors (DSPs) and Field Programmable Gate Array (FPGA). This system implements cavity servoing and beam control capabilities, such as phase and radial loops. Beam tests of the CNAO synchrotron LLRF system were carried out at CERN’s Proton Synchrotron Booster (PSB) in autumn 2007, to verify the combined DSP/FPGA architecture and the beam control capabilities. For this, a prototype version of CNAO’s LLRF system was adapted to the PSB requirements. This paper outlines the prototype system layout and describes the tests carried out and their results. In particular, system architecture and beam control capabilities were successfully proven by comparison with the PSB operational beam control system and with the help of several existing beam diagnostic systems. | ||
| WEPC075 | Recent Results and Future Perspectives of the SPARC Project | 2169 |
|
||
| The SPARC project foresees the realization of a high brightness photo-injector to produce a 150-200 MeV electron beam to drive 500 nm FEL experiments in various configurations, a Thomson backscattering source and a plasma accelerator experiment. The SPARC photoinjector is also the test facility for the recently approved VUV FEL project named SPARX. As a first stage of the commissioning a complete characterization of the photoinjector has been accomplished with a detailed study of the emittance compensation process downstream the gun-solenoid system and the demonstration of the emittance oscillation in the drift. The second stage of the commissioning, that is currently underway, foresees a detailed analysis of the beam matching with the linac in order to confirm the theoretically prediction of emittance compensation based on the “invariant envelope” matching and the demonstration of the “velocity bunching” technique in the linac. In this paper we report the experimental results obtained so far and the scientific program for the near future. | ||
| TUPP132 | Design, Construction and Low Power RF Tests of the First Module of the ACLIP Linac | 1836 |
|
||
| ACLIP is a 3 GHz proton SCL linac designed as a booster for a 30 MeV commercial cyclotron. The final energy is 62 MeV well suitable for the therapy of ocular tumours or for further acceleration (up to 230 MeV) by a second linac in order to treat deep seated tumours. The possibility of using magnetrons as the source of RF power, to reduce the overall cost of the machine, is under investigation within a collaboration with the company e2v (Chelmsford, UK). ACLIP is a 5 modules structure coupled together. The first one (able to accelerate proton from 30 to 35 MeV) has been machined and completely the brazed. We plan to have the high power test by early fall 2008. In this paper we will review the main features of the linac and discuss the results of the RF measurements carried out on this prototype. |