| Paper |
Title |
Page |
| MOPP112 |
Status of the PEFP Superconducting RF Project
|
820 |
| |
- S. An, Y.-S. Cho, B. H. Choi, C. Gao, Y. M. Li, Y. Z. Tang, L. Zhang
KAERI, Daejon
|
|
| |
Superconducting RF project of the Proton Engineering Frontier Project (PEFP) aims to develop a superconducting RF linac to accelerate a proton beam above 80 MeV at 700 MHz. The preliminary design of a low-beta cryomodule has been completed. A low-beta (β=0.42) cavity, a higher-mode coupler and a fundamental power coupler (FPC) for the PEFP cavities have also been designed. A FPC baking system and high power RF conditioning system are under construction. A helium vesel made of stainless steel has been designed. A new tuner has also been designed. Two prototype copper cavities have been produced and tested. The HOM coupler has been measured on the copper cavities. A cryostat for a SRF cavity vertical testing has been designed.
|
|
| THPP093 |
Conceptual Design of the PEFP Beam Line
|
3581 |
| |
- I.-S. Hong, Y.-S. Cho, B. H. Choi, B. Chung, J.-H. Jang, H. S. Kim, K. R. Kim, H.-J. Kwon, B.-S. Park, S. P. Yun
KAERI, Daejon
|
|
| |
In the Proton Engineering Frontier Project (PEFP), 20MeV and 100MeV proton beams from a 100MeV proton liner accelerator will be supplied to users for proton beam applications. Switch magnets will share the beam to three directions, two fixed beam lines and one AC magnet. The two fixed beam lines will be used for isotope production and power semiconductor production. An AC magnet will distribute the beams to three targets simultaneously. To provide flexibilities of irradiation conditions for users from many application fields, we designed beam lines to the targets with wide or focused, external or in-vacuum, and horizontal or vertical beams. As far as possible we designed the simple beam lines to reduce the construction cost. The details of the beam line conceptual design will be reported.
|
|