| Paper |
Title |
Page |
| TUPC004 |
The Diagnostic Line of Elettra Booster 100MeV Pre-injector
|
1044 |
| |
- S. Bassanese, L. Badano, M. Bossi, A. Carniel, G. Ciani, S. Di Mitri, M. Ferianis, G. Mian, G. Penco, M. Veronese
ELETTRA, Basovizza, Trieste
|
|
| |
In order to fully characterize the beam of the new 100MeV linac pre-injector for the Elettra Booster, a standard diagnostic set-up has been designed which includes strip line BPMs, scintillating screens and current transformers. During the initial tuning of the pre-injector, a thermo-ionic gun followed by a 500MHz pre bunching cavity, an S-band bunching structure and two LIL accelerating sections, some extra diagnostics have been used to get a deeper understanding of the pre-injector operating point. In particular some prototypes of the FERMI@elettra diagnostics, installed on the same booster pre-injector, have been used to better characterize the beam transverse and longitudinal beam axis. An improved resolution screen system, equipped with a YAG screen, has been used as well as a wideband longitudinal pick-up. The measurement results as well as the tuning procedure are here presented.
|
|
| TUPC079 |
Beam Emittance Measurement for the New Full Energy Injector at ELETTRA
|
1236 |
| |
- G. Penco, L. Badano, S. Bassanese, G. Ciani, P. Craievich, S. Di Mitri, M. Ferianis, M. Predonzani, M. Veronese
ELETTRA, Basovizza, Trieste
- A. A. Lutman
DEEI, Trieste
|
|
| |
An emittance measurement station was set up and operated with the quadrupole scan technique to characterize the electron beam transverse phase space at the Elettra laboratory. The diagnostic station, based on a YAG:Ce scintillation screen imaged by a CCD digital camera, was installed at the end of the 100 MeV booster pre-injector together with a beam longitudinal structure monitor. This equipment plays an important role for the bunching system optimization and for the optical matching of the injection transfer line to the booster ring. Experimental results and comparison with multi-particle tracking codes simulation are presented in this paper.
|
|
| THPC153 |
Timing System of the New Elettra Injector
|
3351 |
| |
- S. Bassanese, A. Carniel, R. De Monte, M. Ferianis, G. Gaio
ELETTRA, Basovizza, Trieste
|
|
| |
A new timing system has been developed to operate the new injector for the Elettra storage ring. It implements a versatile injection system to support standard and exotic fillings as well as the top-up mode of operation. Based on an in-house developed programmable counter VME board, the system provides all the needed triggers by the pre-injector LINAC, the booster injection, the booster ramping system, the booster extraction, and the SR injection. An overview of the system architecture and functionality is described and the performance of the board is reported. All the trigger signals are distributed to the timing clients by means of optical links.
|
|