A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z    

Rowe, A.M.

Paper Title Page
MOPCH174 Optimization of the BCP Processing of Elliptical Nb SRF Cavities 469
 
  • C. Boffo, C. A. Cooper, A.M. Rowe
    Fermilab, Batavia, Illinois
  • G. Galasso
    University of Udine, Udine
 
  Bulk niobium (Nb) electropolished SRF cavities performing at or above 35 MV/m is an aggressive goal recently put forth by the International Linear Collider (ILC) collaboration. Buffered chemical polishing (BCP) is still the most cost effective and least complex processing technique known today to optimize the surface properties of high gradient single crystal and relatively low gradient polycrystalline SRF cavities. BCP will be the preferred chemical process in the production of the nine-cell third harmonic 3.9 GHz cavities at Fermilab. The internal shape of these cavities will result in uneven material removal rates between iris and equator of the cells. We will describe a thermal-fluid finite element model adopted to simulate the etching process, and thus revealing the issues at hand. Experimental work, such as flow visualization tests performed to verify the simulation, will also be discussed. Finally we are presenting results obtained with a novel device, which allows to homogenize the flow pattern and to resolve the problem.  
MOPLS104 The Progress in Developing Superconducting Third Harmonic Cavity 804
 
  • N. Solyak, H. Edwards, M. Foley, I.G. Gonin, E.R. Harms, T.K. Khabiboulline, D.V. Mitchell, D.O. Olis, A.M. Rowe
    Fermilab, Batavia, Illinois
 
  XFEL and TTF facilities are planning to use section with a few third harmonic cavities (3.9GHz) upstream of the bunch compressor to improve beam performances [1-2]. Fermilab is developing superconducting third harmonic section for TTFII upgrade. This section will include four cavities equiped with couplers and blade tuners, installed in cryostat. Up to now, two cavities are complete and one of them is under test. The status of the cavity development and preliminary test results are presented in the paper.