A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z    

Meshkov, O.I.

Paper Title Page
MOPLS038 Beam Energy Calibration in Experiment on Precise Tau Lepton Mass Measurement at VEPP-4M with KEDR Detector 625
 
  • A. Bogomyagkov, V.E. Blinov, S. Karnaev, V. Kiselev, E.V. Kremyanskaya, E. Levichev, O.I. Meshkov, S.I. Mishnev, I. Morozov, N.Yu. Muchnoi, S.A. Nikitin, I.B. Nikolaev, A.G. Shamov, D.N. Shatilov, E.A. Simonov, A.N. Skrinsky, V.V. Smaluk, Yu.A. Tikhonov, G.M. Tumaikin, V.N. Zhilich
    BINP SB RAS, Novosibirsk
  
  Experiment on mass measurement of tau lepton requires an absolute energy calibration. The resonant depolarization technique is used for most accurate (1 keV) but once at a time energy calibration. The measured energy is used for calibration of the germanium detector for Compton backscattering energy monitoring. The developed Compton backscattering facility allows continuous energy monitoring with accuracy of 50 keV for 10 minutes of data acquisition. The tau lepton threshold is in the vicinity of integer spin resonance, which minimizes polarization lifetime in the presence of vertical orbit distortions. Therefore, spin matching of the VEPP-4M is required. The achieved lifetime is sufficient for absolute energy calibration.  
TUPCH073 Study of Beam Energy Spread at the VEPP-4M 1178
 
  • O.I. Meshkov, V. F. Gurko, A.D. Khilchenko, V. Kiselev, N.Yu. Muchnoi, A.N. Selivanov, V.V. Smaluk, A. N. Zhuravlev
    BINP SB RAS, Novosibirsk
  
  The knowledge of beam energy spread is necessary for the experimental program of the VEPP-4M collider. In this report we discuss the application of optical diagnostics for measurement of this value. The diagnostics is based on multi-anode photomultiplier and provides information about betatron and betetron frequencies of electron beam*. The beam energy spread is derived from the spectra of synchrotron oscillation. The results, obtained with this method, are compared with data, provided by Compton backscattering technique.

*O. I. Meshkov et al. Application of the beam profile monitor for VEPP-4M tuning. Proc. of DIPAC '05, June 6 - 8, 2005, Lyon, France, POM008.