| Paper |
Title |
Page |
| TUPLS137 |
Design of the Utility System for the 3 GeV TPS Electron Storage Ring
|
1828 |
| |
- J.-C. Chang, J.-R. Chen, Y.-C. Lin, Y.-H. Liu, Z.-D. Tsai
NSRRC, Hsinchu
|
|
| |
After 13-year operation of the Taiwan Light Source (TLS), National Synchrotron Radiation Research Center (NSRRC), had proposed to construct a new light sourc, Taiwan Photon Source (TPS) in the near future. TPS is preliminarily designed with 3.0 GeV in energy, 518.4m in circumference and 24 Double-Bend Achromat (DBA). This study designed the utility system, including the electrical power system, grounding system, de-ionized cooling water (DIW) system and air conditioning (AC) system for the TPS. Special considerations are focused on the stability of the electrical power and grounding system and temperature control of the DIW and AC systems. The power and cooling loads had been estimated according to each subsystem of the accelerator. Layouts of main utility equipment and piping system had also been preliminarily designed.
|
|
| THPCH187 |
Analysis and Reduction Electromagnetic Interference to ICTs Caused by Pulsed Power Supply Excitation in NSRRC
|
3239 |
| |
- Y.-H. Liu, J.-C. Chang, J.-R. Chen, Y.-C. Lin
NSRRC, Hsinchu
|
|
| |
The purpose of this paper is to eliminate the Electromagnetic Interference (EMI) from kicker power supply. Analyses of the EMI source and the propagation path are the beginning missions. The radiated and conducted EMI both affected the Integral Current Transformer (ICT) normal operation because of the space limitation for TLS in NSRRC. The ICT is to measure injection efficiency, thus, ICT located just behind the kickers and using the common girder. The EMI signals therefore are much higher than the electron beam currents, and the integral values of the sensor are not correct. For reducing and eliminating the interference of electromagnetic waves, a hybrid segregation and grounding method was used. The EMI wrapper was enclosed the ICT and its high frequency amplifier separately to prevent the radiated EMI from the space. The grounding paths provided the possible stray current dredge to the ground loop. It reduced the stray current spread to the subsystems next to the kickers. The EMI therefore reduced 99%, and the injection efficiency could be calculated successfully. The elimination of the EMI from kicker itself will be the next step in the future.
|
|