| Paper |
Title |
Page |
| MOPCH095 |
Performance of Nominal and Ultimate LHC Beams in the CERN PS-booster
|
258 |
| |
- M. Benedikt, M. Chanel, K. Hanke
CERN, Geneva
|
|
| |
The requirements for nominal and ultimate LHC beams in the CERN PS-Booster were specified in 1993 and served as input for the definition of the "PS conversion for LHC" project. Already during the upgrade project and also after its completion in 2000, the beam intensities to be provided from the PS Booster were increased in order to compensate for changes on the LHC machine, the beam production scheme in the PS and for non-anticipated beam losses along the injector chain. In order to improve the beam brightness, to be compatible with the increased requirements, extensive machine studies have taken place on the PS-Booster. The working point was changed to reduce the influence of systematic resonances and the injection line optics was re-matched to improve the injection efficiency. The paper summarizes briefly the evolution of the performance requirements. The various measures undertaken to improve the LHC beam quality are outlined and the present performance achieved in the PS-Booster is presented.
|
|
| TUPLS057 |
Linac4, a New Injector for the CERN PS Booster
|
1624 |
| |
- R. Garoby, G. Bellodi, F. Gerigk, K. Hanke, A.M. Lombardi, M. Pasini, C. Rossi, E.Zh. Sargsyan, M. Vretenar
CERN, Geneva
|
|
| |
The first bottle-neck towards higher beam brightness in the LHC injector chain is due to space charge induced tune spread at injection in the CERN PS Booster (PSB). A new injector called Linac4 is proposed to remove this limitation. Using RF cavities at 352 and 704 MHz, it will replace the present 50 MeV proton Linac2, and deliver a 160 MeV, 40 mA H beam. The higher injection energy will reduce space charge effects by a factor of 2, and charge exchange will drastically reduce the beam losses at injection. Operation will be simplified and the beam brightness required for the LHC ultimate luminosity should be obtained at PS ejection. Moreover, for the needs of non-LHC physics experiments like ISOLDE, the number of protons per pulse from the PSB will increase by a significant factor. This new linac constitutes an essential component of any of the envisaged LHC upgrade scenarios, which can also become the low energy part of a future 3.5 GeV, multi-megawatt superconducting linac (SPL). The present design has benefited from the support of the French CEA and IN2P3, of the European Union and of the ISTC (Moscow). The proposed machine and its layout on the CERN site are described.
|
|