A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z    

Brandin, M.

Paper Title Page
MOPCH040 Simulations for the FEL Test Facility at MAX-lab within EUROFEL 127
 
  • S. Thorin, M. Brandin, S. Werin
    MAX-lab, Lund
  • M. Abo-Bakr, J. Bahrdt, K. Goldammer
    BESSY GmbH, Berlin
 
  Within the EUROFEL project a High Gain Harmonic Generation Free Electron Laser will be constructed at MAX-lab in collaboration with BESSY. The electron bunches will be created in the existing MAX-lab injector and transported to the inside of the MAX II ring where the FEL undulators will be located. To predict FEL performance and stability, simulations of the photo injector, linac, recirculator, transport and undulator sections as well as start to end simulations have been carried out.  
MOPCH041 Design of a New Preinjector for the MAX Recirculator to be Used in EUROFEL 130
 
  • S. Werin, M. Brandin, T. Hansen, D. Kumbaro, L. Malmgren, S. Thorin
    MAX-lab, Lund
  • J. Bahrdt
    BESSY GmbH, Berlin
 
  The MAX-lab recirculator injector will be equipped with a new preinjector system. The aim is to reduce the emittance, increase the charge and achieve a proper timing between accelerator and laser systems. All is aimed at the MAX-lab test facility for HG built in collaboration with BESSY in the EUROFEL program. The preinjector system consists of a photo cathode RF-gun with an emittance compensating solenoid. Special issues regard the injection of the new beam into the beam path of the MAX recirculator and the conservation of beam parameters.  
THPLS058 MAX III Commissioning 3416
 
  • M. Eriksson, M. Bergqvist, M. Brandin, L.-J. Lindgren, M. Sjöström, S. Thorin
    MAX-lab, Lund
 
  Some of the features of the 700 MeV MAX III synchrotron radiation storage ring are presented, and the commissioning of this ring is described.  
THPLS059 Status of the MAX IV Light Source Project 3418
 
  • M. Eriksson, M. Berglund, K.I. Blomqvist, M. Brandin, T. Hansen, D. Kumbaro, L.-J. Lindgren, L. Malmgren, M. Sjöström, H. Svensson, H. Tarawneh, S. Thorin, E.J. Wallén, S. Werin
    MAX-lab, Lund
  • B. Anderberg
    AMACC, Uppsala
 
  The present development of the accelerator part of the MAX IV synchrotron radiation project is presented. The main features of the 3 GeV injector linac and the two storage rings operated at different electron energies to cover a broad spectral range of high brilliance undulator radiation are described in some detail. A third ring, the existing MAX III ring, is planned to be transferred to the new facility. The preparation of the injector linac to serve as a free electron laser source and the major sub-systems of the facility are also presented.  
THPLS109 Measurements and Diagnostics on the MAX Recirculator 3532
 
  • M. Brandin, B. Nelander, S. Werin
    MAX-lab, Lund
 
  The MAX Recirculator is a unique accelerator, a two-pass linac at 500 MeV, that operates as injector for three storage rings. Here are presented some discussions on measurments of beam parameters such as emittance, energy spread, and bunch length. We describe what measurements are done, by wich methods, results, and how they can be improved. Also, we make an analysis of What methods and hardware are needed to perform the measurements that can't be done with the equipment in place today.