| Paper |
Title |
Page |
| WEPLS101 |
First Computation of Parasitic Fields in LHC Dipole Magnet Interconnects
|
2613 |
| |
- A. Devred, B. Auchmann, Y. Boncompagni, V. Ferapontov, J.-P. Koutchouk, S. Russenschuck, T. Sahner, C. Vollinger
CERN, Geneva
|
|
| |
The Large Hadron Collider (LHC), now under construction at CERN, will rely on about 1600 main superconducting dipole and quadrupole magnets and over 7400 superconducting corrector magnets distributed around the eight sectors of the machine. Each type of magnets is powered by dedicated superconducting busbars running along each sector and passing through the iron yokes of the main dipole and quadruple magnets. In the numerous magnet interconnects, the busbars are not magnetically shielded from the beam pipes and produce parasitic fields that can affect beam optics. We review the 3D models which have been built with the ROXIE software package to evaluate these parasitic fields and we discuss the computation results and their potential impacts on machine performance.
|
|
| WEPLS107 |
Comparative Study of Inter-strand Coupling Current Models for Accelerator Magnets
|
2631 |
| |
- R. de Maria, B. Auchmann, S. Russenschuck
CERN, Geneva
|
|
| |
"Inter-Strand Coupling Currents" (ISCCs) contribute to field errors and losses in Rutherford-type superconducting cables in the time- transient regime. The field change induces eddy currents in loops formed by the superconducting twisted strands and the resistive matrix. In the ROXIE program two models are implemented to simulate ISCCs in a magnet cross-section: A network model uses an electric circuit to represent the geometry of the twisted strands and their resistive contacts; an analytical model simplifies the network equations to determine an equivalent cable magnetization from an average field sweep over the cable. The implementation of the models in ROXIE allows to combine them with models for "Persistent Currents" and "Inter-Filament Coupling Currents". The non-linear iron yoke can be taken into account as well. The predictions of different ISCC models with regard to losses and field errors are compared for two design versions of the LHC main dipole. We find that as far as field quality is concerned, the models perform equally well. As for losses, however, the analytical model cannot capture the complexity of the problem and computes lower losses than the network model.
|
|