| Paper |
Title |
Page |
| TUP005 |
Magnetic Field Effects on Superconducting Cavity
|
143 |
| |
- M. Ono, E. Kako, K. Saito, T. Shishido, S. Noguchi, T. Yokoi
KEK, Ibaraki
|
|
| TUP011 |
Improvement of Cavity Performance in the Saclay/Cornell/DESY's SC Cavities
|
179 |
| |
- E. Kako, S. Noguchi, M. Ono, K. Saito, T. Shishido
KEK, Ibaraki
- H. Safa
CEA-Saclay, Gif-sur-Yvette
- J. Knobloch
Cornell University, Ithaca, New York
- L. Lilje
DESY, Hamburg
|
|
| TUP022 |
Test Results of the L-Band Superconducting Cavity made from Twice Melted Niobium
|
246 |
| |
- T. Shishido, T. Fujino, H. Inoue, E. Kako, S. Noguchi, M. Ono, K. Saito
KEK, Ibaraki
- T. Higuchi
Nomura Plating Co. Ltd., Tochigi-ken
|
|
| TUP030 |
Long Term Air Exposure Effect on the Electropolished Surface of Niobium Superconducting RF Cavity
|
270 |
| |
- K. Saito, E. Kako, T. Shishido, S. Noguchi, M. Ono, Y. Yamazaki
KEK, Ibaraki
|
|
| TUP032 |
Discovery of the Needless of Outgas Annealing after Horizontally Continuously Rotated Electropolishing with Niobium Superconducting RF Cavities
|
283 |
| |
- K. Saito, E. Kako, S. Noguchi, M. Ono, T. Shishido, Y. Yamazaki
KEK, Ibaraki
- T. Higuchi
Nomura Plating Co. Ltd., Tochigi-ken
|
|
| TUP033 |
High Gradient Performance by Electropolishing with 1300 MHz Single and Multi-cell Niobium Superconducting Cavities
|
288 |
| |
- K. Saito, H. Inoue, E. Kako, S. Noguchi, M. Ono, T. Shishido, Y. Yamazaki
KEK, Ibaraki
- T. Higuchi
Nomura Plating Co. Ltd., Tochigi-ken
- M. Kawamoto
Pechiney Japon, Ltd., Tokyo
- T. Ota
Toshiba Corporation, Yokohama
- K. Nakanishi
MHI , Kobe Shipyard, Kobe
- Y. Matsubara
Sumitimo Heavy Industries, Ltd., Tokyo
- P. Kneisel
JLAB, Newport News
- D. Proch, L. Lilje
DESY, Hamburg
|
|
| TUP034 |
Effect of N2 Gas Exposure on the L-band Superconducting Cavity
|
292 |
| |
- Y. Kijima, H. Kitamura, Y. Murai
Mitsubishi Electric Corporation, Kobe
- E. Kako, S. Noguchi, M. Ono, K. Saito, T. Shishido
KEK, Ibaraki
|
|
| WEP002 |
Promising Performance of the Nb/Cu Clad Seamless Superconducting RF Cavities
|
372 |
| |
- T. Fujino, K. Saito, H. Inoue, N. Hitomi, S. Noguchi, M. Ono, E. Kako, T. Shishido, Y. Yamazaki
KEK, Ibaraki
- V. Palmieri
INFN/LNL, Legnaro, Padova
|
|
| TUP025 |
Development of Horizontal Chemical Polishing for Superconducting Niobium Cavities
|
254 |
| |
- T. Higuchi, S. Fukuda, T. Ikeda, S. Nomura, S. Ogushi, M. Shiratake, T. Suzuki
Nomura Plating Co. Ltd., Tochigi-ken
- E. Kako, S. Noguchi, M. Ono, K. Saito, T. Shishido
KEK, Ibaraki
|
|
| WEP012 |
Development of a 1.8K Level Cooling System and Cryostat for a Superconducting Cavity
|
401 |
| |
- N. Kakutani, H. Hatakeyama, T. Kuriyama, Y. Oonishi, T. Ota, M. Takahashi, O. Takeda, Y. Tanabe, A. Yamashita, T. Yoshiyuki
Toshiba Corporation, Yokohama
- E. Kako, S. Noguchi, M. Ono, K. Saito, T. Shishido, Y. Yamazaki
KEK, Ibaraki
|
|
| WEP020 |
Superconducting Cavity Development for High Intensity Proton Linac in JAERI
|
450 |
| |
- N. Ouchi, N. Akaoka, E. Chishiro, K. Hasegawa, M. Mizumoto, J. Kusano
JAERI, Ibaraki
- H. Inoue, E. Kako, S. Noguchi, M. Ono, K. Saito, T. Shishido
KEK, Ibaraki
- K. Mukugi, C. Tsukishima
MELCO, Kobe
- O. Takeda
Toshiba Corporation, Yokohama
- M. Matsuoka
MHI, Yokohama, Kanagawa-ken
|
|