The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - CPAPER AU - Ferreira, L.M.A. TI - Cathode Geometry and Flow Dynamics Impact on Vertical Electropolishing of Superconducting Niobium Cavities J2 - Proc. of International Conference on RF Superconductivity (SRF2015), Whistler, BC, Canada, Sept. 13-18, 2015 AB - CERN has now a fully operating vertical electropolishing installation, which has been used for the processing of 704 MHz high-beta five-cell Superconducting Proton Linac (SPL) niobium cavities. This installation relies only on the electrolyte circulation (HF/H2SO4) for power dissipation, evacuation of gases and homogeneous finishing; thus, parameters like cathode geometry, electrolyte flow and temperature become even more crucial when compared with horizontal electropolishing installations. Based on computational simulations performed with Comsol Multiphysics® and on a methodology developed at CERN, it is possible to assess the impact of the different cathode geometries as well as of the flow on the etching rate distribution. The data obtained with two different cathode geometries are presented: electrolyte velocity distribution, etching rate distribution, average current density and minimum working potential. One geometry was defined through a purely electrochemical approach while the second was defined to minimise the difference between the maximum and the minimum electrolyte speed inside the cavity; in both cases, the influence of the electrolyte flow was taken into account. PB - JACoW CY - Geneva, Switzerland SP - 385 EP - 389 KW - cavity KW - cathode KW - niobium KW - simulation KW - operation DA - 2015/12 PY - 2015 SN - 978-3-95450-178-6 DO - 10.18429/JACoW-SRF2015-MOPB100 UR - http://srf2015.vrws.de/papers/mopb100.pdf ER -