SRF2013 - List of Authors (Sertore, D.)

Paper	Title	Page
MOP011	European XFEL 3.9 GHz System	100
	P. Pierini, M. Bertucci, A. Bosotti, C. Maiano, P. Michelato, L. Monaco, R. Paparella, D. Sertore INFN/LASA, Segrate (MI), Italy C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy E. Vogel DESY, Hamburg, Germany
	The third harmonic system of the European XFEL is a joint INFN and DESY contribution to the project. Achievements, status and activity plan will be reviewed.

TUP062	Application of In-Vacuum Infrared Pyrometry During Fabrication of European XFEL Niobium Cavities	570
	L. Monaco, P. Michelato, D. Sertore INFN/LASA, Segrate (MI), Italy V. Battista, G. Corniani, M. Festa Ettore Zanon S.p.A., Schio, Italy C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy
	A technique to measure the temperature of Niobium components in vacuum during Electron Beam Welding (EBW) operation is presented and results obtained on the large scale cavity production for the European XFEL are discussed. During the EBW process, the knowledge of the components temperature during the welding operation could help both for the better choice of the welding parameters and for the optimization of the production cycle. In collaboration with the Italian firm Ettore Zanon (EZ), we developed a system able to measure the temperature of Nb components in vacuum during EBW operation using a IR pyrometer placed outside the vacuum chamber through an appropriate vacuum viewport. In the paper the experience of this device during the production of Nb components for the XFEL 1.3 GHz cavity production is discussed.

TUP102	Quench Detection Diagnostics on 3.9 GHz XFEL Cavities	710
	M. Bertucci, A. Bosotti, L. Garolfi, P. Michelato, L. Monaco, D. Sertore INFN/LASA, Segrate (MI), Italy C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy
	This paper presents results of quench localization on 3.9 GHz XFEL prototype cavities tested at LASA vertical test facility. Cavities have been equipped with OST second sound detectors and thermometry sensors. A first guess for quench position has been obtained from modal analysis. Second sound sensors confirmed the quench position resolving also the symmetry degeneracy given by the RF mode pattern analysis. In a subsequent vertical test, second sound and temperature sensors have been installed nearby the suspect quench position. From Thermometry mapping, a sudden increase in cavity temperature within a small region is evident, therefore confirming that a local thermal breakdown due to defect heating occurs in the predicted quench point. The quench region deduced with the mentioned techniques is eventually compared with results of optical inspection.

Paper

Title

Page

European XFEL 3.9 GHz System

100

P. Pierini, M. Bertucci, A. Bosotti, C. Maiano, P. Michelato, L. Monaco, R. Paparella, D. Sertore
INFN/LASA, Segrate (MI), Italy
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy
E. Vogel
DESY, Hamburg, Germany

The third harmonic system of the European XFEL is a joint INFN and DESY contribution to the project. Achievements, status and activity plan will be reviewed.

TUP062

Application of In-Vacuum Infrared Pyrometry During Fabrication of European XFEL Niobium Cavities

570

L. Monaco, P. Michelato, D. Sertore
INFN/LASA, Segrate (MI), Italy
V. Battista, G. Corniani, M. Festa
Ettore Zanon S.p.A., Schio, Italy
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy

A technique to measure the temperature of Niobium components in vacuum during Electron Beam Welding (EBW) operation is presented and results obtained on the large scale cavity production for the European XFEL are discussed. During the EBW process, the knowledge of the components temperature during the welding operation could help both for the better choice of the welding parameters and for the optimization of the production cycle. In collaboration with the Italian firm Ettore Zanon (EZ), we developed a system able to measure the temperature of Nb components in vacuum during EBW operation using a IR pyrometer placed outside the vacuum chamber through an appropriate vacuum viewport. In the paper the experience of this device during the production of Nb components for the XFEL 1.3 GHz cavity production is discussed.

TUP102

Quench Detection Diagnostics on 3.9 GHz XFEL Cavities

710

M. Bertucci, A. Bosotti, L. Garolfi, P. Michelato, L. Monaco, D. Sertore
INFN/LASA, Segrate (MI), Italy
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy

This paper presents results of quench localization on 3.9 GHz XFEL prototype cavities tested at LASA vertical test facility. Cavities have been equipped with OST second sound detectors and thermometry sensors. A first guess for quench position has been obtained from modal analysis. Second sound sensors confirmed the quench position resolving also the symmetry degeneracy given by the RF mode pattern analysis. In a subsequent vertical test, second sound and temperature sensors have been installed nearby the suspect quench position. From Thermometry mapping, a sudden increase in cavity temperature within a small region is evident, therefore confirming that a local thermal breakdown due to defect heating occurs in the predicted quench point. The quench region deduced with the mentioned techniques is eventually compared with results of optical inspection.