SRF2011 - List of Authors (Schubert, S.G.)

Paper	Title	Page
FRIOA07	SRF Photoinjector Tests at HoBiCat	962
	A. Neumann, W. Anders, R. Barday, A. Jankowiak, T. Kamps, J. Knobloch, O. Kugeler, A.N. Matveenko, T. Quast, J. Rudolph, S.G. Schubert, J. Völker HZB, Berlin, Germany P. Kneisel JLAB, Newport News, Virginia, USA G. Lorenz FHI, Berlin, Germany R. Nietubyc The Andrzej Soltan Institute for Nuclear Studies, Centre Swierk, Swierk/Otwock, Poland J.K. Sekutowicz DESY, Hamburg, Germany J. Smedley BNL, Upton, Long Island, New York, USA I. Will MBI, Berlin, Germany
	Funding: Work funded by the Bundesministerium für Bildung und Forschung and Land Berlin. In collaboration with Jefferson Laboratory, DESY and the A. Soltan Institute HZB developed a fully superconducting RF photo-injector as a first step towards a high average current electron source for the BERLinPro ERL. This setup consists of a 1.6 cell superconducting gun cavity with a lead cathode plasma-arc deposited on the half cell backwall and a superconducting solenoid. The system, including a warm diagnostic beam-line section, was recently installed in the HoBiCaT test facility to study beam dynamics within the ERL parameter range. This paper will give an overview of the horizontal cavity tests, dark current studies and beam measurements.

Paper

Title

Page

SRF Photoinjector Tests at HoBiCat

962

A. Neumann, W. Anders, R. Barday, A. Jankowiak, T. Kamps, J. Knobloch, O. Kugeler, A.N. Matveenko, T. Quast, J. Rudolph, S.G. Schubert, J. Völker
HZB, Berlin, Germany
P. Kneisel
JLAB, Newport News, Virginia, USA
G. Lorenz
FHI, Berlin, Germany
R. Nietubyc
The Andrzej Soltan Institute for Nuclear Studies, Centre Swierk, Swierk/Otwock, Poland
J.K. Sekutowicz
DESY, Hamburg, Germany
J. Smedley
BNL, Upton, Long Island, New York, USA
I. Will
MBI, Berlin, Germany

Funding: Work funded by the Bundesministerium für Bildung und Forschung and Land Berlin.
In collaboration with Jefferson Laboratory, DESY and the A. Soltan Institute HZB developed a fully superconducting RF photo-injector as a first step towards a high average current electron source for the BERLinPro ERL. This setup consists of a 1.6 cell superconducting gun cavity with a lead cathode plasma-arc deposited on the half cell backwall and a superconducting solenoid. The system, including a warm diagnostic beam-line section, was recently installed in the HoBiCaT test facility to study beam dynamics within the ERL parameter range. This paper will give an overview of the horizontal cavity tests, dark current studies and beam measurements.