PCaPAC2014 - List of Authors (Wu, C.Y.)

Paper	Title	Page
WPO033	Status of Control System for the TPS Commissioning	114
	Y.-S. Cheng, Y.-T. Chang, J. Chen, P.C. Chiu, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, C.H. Kuo, D. Lee, C.Y. Liao, C.-J. Wang, C.Y. Wu NSRRC, Hsinchu, Taiwan
	Control system for the Taiwan Photon Source (TPS) project has been implemented. The accelerator system began to be commissioning from third quarter of 2014. Final integration test of each subsystem will be done. The EPICS was chosen as the TPS control system framework. The subsystems control interfaces include event based timing system, Ethernet based power supply control, corrector power supply control, PLC-based pulse magnet power supply control and machine protection system, insertion devices motion control system, various diagnostics, and etc. The standard hardware components had been installed and integrated, and the various IOCs (Input Output Controller) had been implemented as various subsystems control platforms. Development and test of the high level and low level software systems are in final phase. The efforts will be summarized at this report.

FPO030	Control System Software Environment and Integration for the TPS	222
FPI05	use link to see paper's listing under its alternate paper code
	Y.-S. Cheng, J. Chen, P.C. Chiu, K.T. Hsu, C.H. Huang, C.H. Kuo, C.Y. Liao, C.Y. Wu NSRRC, Hsinchu, Taiwan
	The TPS (Taiwan Photon Source) is the latest generation 3 GeV synchrotron light source, and the commissioning starts from third quarter of 2014. The EPICS is adopted as control system framework for the TPS. The various EPICS IOCs have implemented for each subsystem. The control system software environment has been established and integrated specifically for the TPS commissioning. The various purposed operation interfaces have been created and mainly include the function of setting, reading, save, restore and etc. The database related applications have been built, and the applications include archive system, alarm system, logbook, Web and etc. The high level applications which are depended upon properties of each subsystem have been developed and are in test phase. The efforts will be summarized at this report.
	Slides FPO030 [1.533 MB]

FPO032	TPS Screen Monitor User Control Interface	228
	C.Y. Liao, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.H. Kuo, D. Lee, C.Y. Wu NSRRC, Hsinchu, Taiwan
	The Taiwan Photon Source (TPS) is being constructed at the campus of the NSRRC (National Synchrotron Radiation Research Center) and in commissioning. For beam commissioning, the design and implementation of a screen monitor system for beam profile acquisition, analysis and display was done. A CCD camera with Gigabit Ethernet interface (GigE Vision) is a standard device for image acquisition, to be undertaken with an EPICS IOC via a PV channel; display beam profile and analysis properties are made with a Matlab tool. The further instructions for the design and functionality of the GUI were presented in this report.

Paper

Title

Page

Status of Control System for the TPS Commissioning

114

Y.-S. Cheng, Y.-T. Chang, J. Chen, P.C. Chiu, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, C.H. Kuo, D. Lee, C.Y. Liao, C.-J. Wang, C.Y. Wu
NSRRC, Hsinchu, Taiwan

Control system for the Taiwan Photon Source (TPS) project has been implemented. The accelerator system began to be commissioning from third quarter of 2014. Final integration test of each subsystem will be done. The EPICS was chosen as the TPS control system framework. The subsystems control interfaces include event based timing system, Ethernet based power supply control, corrector power supply control, PLC-based pulse magnet power supply control and machine protection system, insertion devices motion control system, various diagnostics, and etc. The standard hardware components had been installed and integrated, and the various IOCs (Input Output Controller) had been implemented as various subsystems control platforms. Development and test of the high level and low level software systems are in final phase. The efforts will be summarized at this report.

FPO030

Control System Software Environment and Integration for the TPS

222

FPI05

use link to see paper's listing under its alternate paper code

Y.-S. Cheng, J. Chen, P.C. Chiu, K.T. Hsu, C.H. Huang, C.H. Kuo, C.Y. Liao, C.Y. Wu
NSRRC, Hsinchu, Taiwan

The TPS (Taiwan Photon Source) is the latest generation 3 GeV synchrotron light source, and the commissioning starts from third quarter of 2014. The EPICS is adopted as control system framework for the TPS. The various EPICS IOCs have implemented for each subsystem. The control system software environment has been established and integrated specifically for the TPS commissioning. The various purposed operation interfaces have been created and mainly include the function of setting, reading, save, restore and etc. The database related applications have been built, and the applications include archive system, alarm system, logbook, Web and etc. The high level applications which are depended upon properties of each subsystem have been developed and are in test phase. The efforts will be summarized at this report.

Slides FPO030 [1.533 MB]

FPO032

TPS Screen Monitor User Control Interface

228

C.Y. Liao, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.H. Kuo, D. Lee, C.Y. Wu
NSRRC, Hsinchu, Taiwan

The Taiwan Photon Source (TPS) is being constructed at the campus of the NSRRC (National Synchrotron Radiation Research Center) and in commissioning. For beam commissioning, the design and implementation of a screen monitor system for beam profile acquisition, analysis and display was done. A CCD camera with Gigabit Ethernet interface (GigE Vision) is a standard device for image acquisition, to be undertaken with an EPICS IOC via a PV channel; display beam profile and analysis properties are made with a Matlab tool. The further instructions for the design and functionality of the GUI were presented in this report.