PCaPAC2014 - List of Authors (Saleh, I.)

Paper

Title

Page

Personnel Safety System in SESAME

87

M. Mansouri Sharifabad, A. Ismail, I. Saleh
SESAME, Allan, Jordan

Funding: International Atomic Energy Agency (IAEA)
SESAME (Synchrotron-light for Experimental Science and Applications in the Middle East) is a “third-generation” synchrotron light source under construction in Allan, Jordan. Personnel Safety System (PSS) in SESAME restricts and controls the access to forbidden areas of radiation. The PSS is an independent system which is built on Safety PLCs. In order to achieve the desired Safety Integrity Level which is SIL-3, as defined in IEC 61508, several interlocks and access procedures have been implemented in the system fulfilling characteristics such as fail-safe, redundancy and diversity. Also a system meant for monitoring and diagnostics of PSS is built based on EPICS and HMI. PSS PLCs which implement interlock logic send all the input and output bits and PLC status information to EPICS IOC which is not an integral function of PSS operation. This IOC will be connected to other control system’s IOCs to send informative signals describing the status of PSS to the main control system in SESAME. In addition, 5 combined Gamma-Neutron radiation monitors which are distributed around and over the booster area send interlock signals to personnel safety system.

WPO024

Clients Development of SESAME's Control System based on CSS

90

I. Saleh, Y.S. Dabain, A. Ismail, M. Mansouri Sharifabad
SESAME, Allan, Jordan

SESAME is a third generation synchrotron light source under construction near Amman (Jordan). It is expected to begin operation in 2016. SESAME's injector (Microtron) and pre-injector (Booster Ring) have been commissioned. Commissioning of the storage ring is expected in 2015. The control system at SESAME is based on EPICS. EPICS IOC's are used for the servers. Control System Studio (CSS) is used for the clients. CSS BEAST alarm handler is used to identify all the critical alarms of the machine including configuration and visualization. This paper presents the architecture and design of the CSS BOY graphical user interfaces (GUIs) and CSS BEAST alarm handler for the different subsystems. It presents the standards followed in the development of SESAME's clients. SESAME will use an archiving tool based on CSS to access process variable history.

Poster WPO024 [0.251 MB]

Paper	Title	Page
WPO023	Personnel Safety System in SESAME	87
	M. Mansouri Sharifabad, A. Ismail, I. Saleh SESAME, Allan, Jordan
	Funding: International Atomic Energy Agency (IAEA) SESAME (Synchrotron-light for Experimental Science and Applications in the Middle East) is a “third-generation” synchrotron light source under construction in Allan, Jordan. Personnel Safety System (PSS) in SESAME restricts and controls the access to forbidden areas of radiation. The PSS is an independent system which is built on Safety PLCs. In order to achieve the desired Safety Integrity Level which is SIL-3, as defined in IEC 61508, several interlocks and access procedures have been implemented in the system fulfilling characteristics such as fail-safe, redundancy and diversity. Also a system meant for monitoring and diagnostics of PSS is built based on EPICS and HMI. PSS PLCs which implement interlock logic send all the input and output bits and PLC status information to EPICS IOC which is not an integral function of PSS operation. This IOC will be connected to other control system’s IOCs to send informative signals describing the status of PSS to the main control system in SESAME. In addition, 5 combined Gamma-Neutron radiation monitors which are distributed around and over the booster area send interlock signals to personnel safety system.

WPO024	Clients Development of SESAME's Control System based on CSS	90
	I. Saleh, Y.S. Dabain, A. Ismail, M. Mansouri Sharifabad SESAME, Allan, Jordan
	SESAME is a third generation synchrotron light source under construction near Amman (Jordan). It is expected to begin operation in 2016. SESAME's injector (Microtron) and pre-injector (Booster Ring) have been commissioned. Commissioning of the storage ring is expected in 2015. The control system at SESAME is based on EPICS. EPICS IOC's are used for the servers. Control System Studio (CSS) is used for the clients. CSS BEAST alarm handler is used to identify all the critical alarms of the machine including configuration and visualization. This paper presents the architecture and design of the CSS BOY graphical user interfaces (GUIs) and CSS BEAST alarm handler for the different subsystems. It presents the standards followed in the development of SESAME's clients. SESAME will use an archiving tool based on CSS to access process variable history.
	Poster WPO024 [0.251 MB]