PCaPAC2014 - List of Authors (Hu, K.H.)

Paper	Title	Page
WPO033	Status of Control System for the TPS Commissioning	114
	Y.-S. Cheng, Y.-T. Chang, J. Chen, P.C. Chiu, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, C.H. Kuo, D. Lee, C.Y. Liao, C.-J. Wang, C.Y. Wu NSRRC, Hsinchu, Taiwan
	Control system for the Taiwan Photon Source (TPS) project has been implemented. The accelerator system began to be commissioning from third quarter of 2014. Final integration test of each subsystem will be done. The EPICS was chosen as the TPS control system framework. The subsystems control interfaces include event based timing system, Ethernet based power supply control, corrector power supply control, PLC-based pulse magnet power supply control and machine protection system, insertion devices motion control system, various diagnostics, and etc. The standard hardware components had been installed and integrated, and the various IOCs (Input Output Controller) had been implemented as various subsystems control platforms. Development and test of the high level and low level software systems are in final phase. The efforts will be summarized at this report.

WPO035	BPM Control, Monitor, and Configuration Environments for TPS Booster	120
	P.C. Chiu, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.H. Kuo NSRRC, Hsinchu, Taiwan
	Booster synchrotron for the Taiwan photon source project which is a 3 GeV synchrotron light source constructed at NSRRC is in commissioning. The BPM electronics Libera Brilliance⁺ [1] are adopted for booster and storage ring of Taiwan Photon Source (TPS). The acceptance test had been completed in 2012 [2]. The provided BPM data is useful for beam commissioning where it can be used to measure beam position, rough beam intensity along the longitudinal position and also for tune measurement. This report summarizes the efforts on BPM control, monitor and configuration environment.

FPO032	TPS Screen Monitor User Control Interface	228
	C.Y. Liao, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.H. Kuo, D. Lee, C.Y. Wu NSRRC, Hsinchu, Taiwan
	The Taiwan Photon Source (TPS) is being constructed at the campus of the NSRRC (National Synchrotron Radiation Research Center) and in commissioning. For beam commissioning, the design and implementation of a screen monitor system for beam profile acquisition, analysis and display was done. A CCD camera with Gigabit Ethernet interface (GigE Vision) is a standard device for image acquisition, to be undertaken with an EPICS IOC via a PV channel; display beam profile and analysis properties are made with a Matlab tool. The further instructions for the design and functionality of the GUI were presented in this report.

Paper

Title

Page

Status of Control System for the TPS Commissioning

114

Y.-S. Cheng, Y.-T. Chang, J. Chen, P.C. Chiu, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, C.H. Kuo, D. Lee, C.Y. Liao, C.-J. Wang, C.Y. Wu
NSRRC, Hsinchu, Taiwan

Control system for the Taiwan Photon Source (TPS) project has been implemented. The accelerator system began to be commissioning from third quarter of 2014. Final integration test of each subsystem will be done. The EPICS was chosen as the TPS control system framework. The subsystems control interfaces include event based timing system, Ethernet based power supply control, corrector power supply control, PLC-based pulse magnet power supply control and machine protection system, insertion devices motion control system, various diagnostics, and etc. The standard hardware components had been installed and integrated, and the various IOCs (Input Output Controller) had been implemented as various subsystems control platforms. Development and test of the high level and low level software systems are in final phase. The efforts will be summarized at this report.

WPO035

BPM Control, Monitor, and Configuration Environments for TPS Booster

120

P.C. Chiu, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.H. Kuo
NSRRC, Hsinchu, Taiwan

Booster synchrotron for the Taiwan photon source project which is a 3 GeV synchrotron light source constructed at NSRRC is in commissioning. The BPM electronics Libera Brilliance⁺ [1] are adopted for booster and storage ring of Taiwan Photon Source (TPS). The acceptance test had been completed in 2012 [2]. The provided BPM data is useful for beam commissioning where it can be used to measure beam position, rough beam intensity along the longitudinal position and also for tune measurement. This report summarizes the efforts on BPM control, monitor and configuration environment.

FPO032

TPS Screen Monitor User Control Interface

228

C.Y. Liao, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.H. Kuo, D. Lee, C.Y. Wu
NSRRC, Hsinchu, Taiwan

The Taiwan Photon Source (TPS) is being constructed at the campus of the NSRRC (National Synchrotron Radiation Research Center) and in commissioning. For beam commissioning, the design and implementation of a screen monitor system for beam profile acquisition, analysis and display was done. A CCD camera with Gigabit Ethernet interface (GigE Vision) is a standard device for image acquisition, to be undertaken with an EPICS IOC via a PV channel; display beam profile and analysis properties are made with a Matlab tool. The further instructions for the design and functionality of the GUI were presented in this report.