PCaPAC2014 - List of Authors (Chiu, P.C.)

Paper	Title	Page
WPO033	Status of Control System for the TPS Commissioning	114
	Y.-S. Cheng, Y.-T. Chang, J. Chen, P.C. Chiu, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, C.H. Kuo, D. Lee, C.Y. Liao, C.-J. Wang, C.Y. Wu NSRRC, Hsinchu, Taiwan
	Control system for the Taiwan Photon Source (TPS) project has been implemented. The accelerator system began to be commissioning from third quarter of 2014. Final integration test of each subsystem will be done. The EPICS was chosen as the TPS control system framework. The subsystems control interfaces include event based timing system, Ethernet based power supply control, corrector power supply control, PLC-based pulse magnet power supply control and machine protection system, insertion devices motion control system, various diagnostics, and etc. The standard hardware components had been installed and integrated, and the various IOCs (Input Output Controller) had been implemented as various subsystems control platforms. Development and test of the high level and low level software systems are in final phase. The efforts will be summarized at this report.

WPO035	BPM Control, Monitor, and Configuration Environments for TPS Booster	120
	P.C. Chiu, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.H. Kuo NSRRC, Hsinchu, Taiwan
	Booster synchrotron for the Taiwan photon source project which is a 3 GeV synchrotron light source constructed at NSRRC is in commissioning. The BPM electronics Libera Brilliance⁺ [1] are adopted for booster and storage ring of Taiwan Photon Source (TPS). The acceptance test had been completed in 2012 [2]. The provided BPM data is useful for beam commissioning where it can be used to measure beam position, rough beam intensity along the longitudinal position and also for tune measurement. This report summarizes the efforts on BPM control, monitor and configuration environment.

FPO030	Control System Software Environment and Integration for the TPS	222
FPI05	use link to see paper's listing under its alternate paper code
	Y.-S. Cheng, J. Chen, P.C. Chiu, K.T. Hsu, C.H. Huang, C.H. Kuo, C.Y. Liao, C.Y. Wu NSRRC, Hsinchu, Taiwan
	The TPS (Taiwan Photon Source) is the latest generation 3 GeV synchrotron light source, and the commissioning starts from third quarter of 2014. The EPICS is adopted as control system framework for the TPS. The various EPICS IOCs have implemented for each subsystem. The control system software environment has been established and integrated specifically for the TPS commissioning. The various purposed operation interfaces have been created and mainly include the function of setting, reading, save, restore and etc. The database related applications have been built, and the applications include archive system, alarm system, logbook, Web and etc. The high level applications which are depended upon properties of each subsystem have been developed and are in test phase. The efforts will be summarized at this report.
	Slides FPO030 [1.533 MB]

Paper

Title

Page

Status of Control System for the TPS Commissioning

114

Y.-S. Cheng, Y.-T. Chang, J. Chen, P.C. Chiu, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, C.H. Kuo, D. Lee, C.Y. Liao, C.-J. Wang, C.Y. Wu
NSRRC, Hsinchu, Taiwan

Control system for the Taiwan Photon Source (TPS) project has been implemented. The accelerator system began to be commissioning from third quarter of 2014. Final integration test of each subsystem will be done. The EPICS was chosen as the TPS control system framework. The subsystems control interfaces include event based timing system, Ethernet based power supply control, corrector power supply control, PLC-based pulse magnet power supply control and machine protection system, insertion devices motion control system, various diagnostics, and etc. The standard hardware components had been installed and integrated, and the various IOCs (Input Output Controller) had been implemented as various subsystems control platforms. Development and test of the high level and low level software systems are in final phase. The efforts will be summarized at this report.

WPO035

BPM Control, Monitor, and Configuration Environments for TPS Booster

120

P.C. Chiu, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.H. Kuo
NSRRC, Hsinchu, Taiwan

Booster synchrotron for the Taiwan photon source project which is a 3 GeV synchrotron light source constructed at NSRRC is in commissioning. The BPM electronics Libera Brilliance⁺ [1] are adopted for booster and storage ring of Taiwan Photon Source (TPS). The acceptance test had been completed in 2012 [2]. The provided BPM data is useful for beam commissioning where it can be used to measure beam position, rough beam intensity along the longitudinal position and also for tune measurement. This report summarizes the efforts on BPM control, monitor and configuration environment.

FPO030

Control System Software Environment and Integration for the TPS

222

FPI05

use link to see paper's listing under its alternate paper code

Y.-S. Cheng, J. Chen, P.C. Chiu, K.T. Hsu, C.H. Huang, C.H. Kuo, C.Y. Liao, C.Y. Wu
NSRRC, Hsinchu, Taiwan

The TPS (Taiwan Photon Source) is the latest generation 3 GeV synchrotron light source, and the commissioning starts from third quarter of 2014. The EPICS is adopted as control system framework for the TPS. The various EPICS IOCs have implemented for each subsystem. The control system software environment has been established and integrated specifically for the TPS commissioning. The various purposed operation interfaces have been created and mainly include the function of setting, reading, save, restore and etc. The database related applications have been built, and the applications include archive system, alarm system, logbook, Web and etc. The high level applications which are depended upon properties of each subsystem have been developed and are in test phase. The efforts will be summarized at this report.

Slides FPO030 [1.533 MB]