PCaPAC2014 - List of Authors (Chang, Y.-T.)

Paper

Title

Page

Status of Control System for the TPS Commissioning

114

Y.-S. Cheng, Y.-T. Chang, J. Chen, P.C. Chiu, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, C.H. Kuo, D. Lee, C.Y. Liao, C.-J. Wang, C.Y. Wu
NSRRC, Hsinchu, Taiwan

Control system for the Taiwan Photon Source (TPS) project has been implemented. The accelerator system began to be commissioning from third quarter of 2014. Final integration test of each subsystem will be done. The EPICS was chosen as the TPS control system framework. The subsystems control interfaces include event based timing system, Ethernet based power supply control, corrector power supply control, PLC-based pulse magnet power supply control and machine protection system, insertion devices motion control system, various diagnostics, and etc. The standard hardware components had been installed and integrated, and the various IOCs (Input Output Controller) had been implemented as various subsystems control platforms. Development and test of the high level and low level software systems are in final phase. The efforts will be summarized at this report.

WPO034

Network Architecture at Taiwan Photon Source of NSRRC

117

C.H. Huang, Y.-T. Chang, Y.-S. Cheng, K.T. Hsu, C.H. Kuo
NSRRC, Hsinchu, Taiwan

A robust, secure and high throughput network is necessary for the 3 GeV Taiwan Photon Source (TPS) in NSRRC. The NSRRC network divides into several subsets according to its functionality and includes CS-LAN, ACC-LAN, SCI-LAN, NSRRC-LAN and INFO-LAN for the instrumental control, subsystem of accelerator, beam-line users, office users and servers for the information office respectively. Each LAN is connected via the core switch by routing protocol to avoid traffic interference. Subsystem subnets connect to control system via EPICS based channel-access gateways for forwarding data. Outside traffic will be block by a firewall to ensure the independence of control system (CS-LAN). Various network management tools and machines are used for maintenance and troubleshooting. The network system architecture, cabling topology and maintainability will be described in this report.

Poster WPO034 [1.847 MB]

Paper	Title	Page
WPO033	Status of Control System for the TPS Commissioning	114
	Y.-S. Cheng, Y.-T. Chang, J. Chen, P.C. Chiu, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, C.H. Kuo, D. Lee, C.Y. Liao, C.-J. Wang, C.Y. Wu NSRRC, Hsinchu, Taiwan
	Control system for the Taiwan Photon Source (TPS) project has been implemented. The accelerator system began to be commissioning from third quarter of 2014. Final integration test of each subsystem will be done. The EPICS was chosen as the TPS control system framework. The subsystems control interfaces include event based timing system, Ethernet based power supply control, corrector power supply control, PLC-based pulse magnet power supply control and machine protection system, insertion devices motion control system, various diagnostics, and etc. The standard hardware components had been installed and integrated, and the various IOCs (Input Output Controller) had been implemented as various subsystems control platforms. Development and test of the high level and low level software systems are in final phase. The efforts will be summarized at this report.

WPO034	Network Architecture at Taiwan Photon Source of NSRRC	117
	C.H. Huang, Y.-T. Chang, Y.-S. Cheng, K.T. Hsu, C.H. Kuo NSRRC, Hsinchu, Taiwan
	A robust, secure and high throughput network is necessary for the 3 GeV Taiwan Photon Source (TPS) in NSRRC. The NSRRC network divides into several subsets according to its functionality and includes CS-LAN, ACC-LAN, SCI-LAN, NSRRC-LAN and INFO-LAN for the instrumental control, subsystem of accelerator, beam-line users, office users and servers for the information office respectively. Each LAN is connected via the core switch by routing protocol to avoid traffic interference. Subsystem subnets connect to control system via EPICS based channel-access gateways for forwarding data. Outside traffic will be block by a firewall to ensure the independence of control system (CS-LAN). Various network management tools and machines are used for maintenance and troubleshooting. The network system architecture, cabling topology and maintainability will be described in this report.
	Poster WPO034 [1.847 MB]