PAC2013 - List of Authors (Russo, T.)

Paper	Title	Page
MOPMA08	Systems Engineering and Integration on the FRIB Project	312
	D. Stout, T. Borden, N.K. Bultman, R. Frazee, M. Leitner, P. Nguyen, T. Russo, E. Tanke, C. Thronson FRIB, East Lansing, USA
	Funding: This is based upon work supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661, by Michigan State University and by the State of Michigan. The Facility for Rare Isotope Beams (FRIB) will be a world-leading, DOE Office of Science national user facility for the study of nuclear structure, reactions, and astrophysics on the campus of Michigan State University (MSU). A superconducting driver linac will be used to provide stable heavy-ion beams of >200 MeV/u at beam powers up to 400 kW to a production target. The stable beams will be used to produce rare isotopes by in flight fragment separation. The MSU-led design and construction effort is supported by collaborations with many National Laboratories and other scientific institutions. Systems Engineering and Integration has been implemented at the outset to ensure that a requirements-driven design process is followed, and to ensure intra and inter-system compatibility. Top-level requirements have been allocated, and subsequently elaborated, between the Accelerator Systems, Experimental Systems, and Conventional Facilities. FRIB has developed a number of methods and tools to track requirements, establish interfaces, monitor design progress, and ensure overall system integration. These will be described in the paper.

THPAC20	Beam Position and Phase Measurements of Microampere Beams at the Michigan State University ReA3 Facility	1187
	J.L. Crisp, B. Durickovic, G. Kiupel, D. Leitner, J.A. Rodriguez, T. Russo, R.C. Webber, W. Wittmer FRIB, East Lansing, Michigan, USA C.I. Briegel, N. Eddy, B.J. Fellenz, D. Slimmer Fermilab, Batavia, USA D. Constan-Wahl, S.W. Krause, S. Nash NSCL, East Lansing, Michigan, USA M. Wendt CERN, Geneva, Switzerland
	A high power CW, heavy ion linac will be the driver accelerator for the Facility for Rare Isotope Beams being designed at Michigan State University. The linac requires a Beam Position Monitoring (BPM) system with better than 100 micron resolution at 100 microamperes beam current. A low beam current test of the candidate technology, button pick-ups and direct digital down-conversion signal processing, was conducted in the ReA3 re-accelerated beam facility at MSU. The test is described. Beam position and phase measurement results, demonstrating ~200 micron and ~1 degree resolution in a 90 kHz bandwidth for a 0.5 microampere beam current, are reported.

FRYBA1	Progress towards the Facility for Rare Isotope Beams	1453
	J. Wei, N.K. Bultman, F. Casagrande, C. Compton, K.D. Davidson, J. DeKamp, B. Drewyor, K. Elliott, A. Facco, P.E. Gibson, T . Glasmacher, K. Holland, M.J. Johnson, S. Jones, D. Leitner, M. Leitner, G. Machicoane, F. Marti, D. Morris, J.A. Nolen, J.P. Ozelis, S. Peng, J. Popielarski, L. Popielarski, E. Pozdeyev, T. Russo, K. Saito, J.J. Savino, R.C. Webber, M. Williams, T. Xu, Y. Yamazaki, A. Zeller, Y. Zhang, Q. Zhao FRIB, East Lansing, USA D. Arenius, V. Ganni JLAB, Newport News, Virginia, USA A. Facco INFN/LNL, Legnaro (PD), Italy R.E. Laxdal TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada J.A. Nolen ANL, Argonne, USA
	Funding: Work supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661 The Facility for Rare Isotope Beams (FRIB) is based on a continuous-wave superconducting heavy ion linac to accelerate all the stable isotopes to above 200 MeV/u with a beam power of up to 400 kW. At an average beam power approximately two-to-three orders-of-magnitude higher than those of operating heavy-ion facilities, FRIB stands at the power frontier of the accelerator family - the first time for heavy-ion accelerators. To realize this innovative performance, superconducting RF cavities are used starting at the very low energy of 500 keV/u, and beams with multiple charge states are accelerated simultaneously. Many technological challenges specific for this linac have been tackled by the FRIB team and collaborators. Furthermore, the distinct differences from the other types of linacs at the power front must be clearly understood to make the FRIB successful. This report summarizes the technical progress made in the past years to meet these challenges.

Paper

Title

Page

Systems Engineering and Integration on the FRIB Project

312

D. Stout, T. Borden, N.K. Bultman, R. Frazee, M. Leitner, P. Nguyen, T. Russo, E. Tanke, C. Thronson
FRIB, East Lansing, USA

Funding: This is based upon work supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661, by Michigan State University and by the State of Michigan.
The Facility for Rare Isotope Beams (FRIB) will be a world-leading, DOE Office of Science national user facility for the study of nuclear structure, reactions, and astrophysics on the campus of Michigan State University (MSU). A superconducting driver linac will be used to provide stable heavy-ion beams of >200 MeV/u at beam powers up to 400 kW to a production target. The stable beams will be used to produce rare isotopes by in flight fragment separation. The MSU-led design and construction effort is supported by collaborations with many National Laboratories and other scientific institutions. Systems Engineering and Integration has been implemented at the outset to ensure that a requirements-driven design process is followed, and to ensure intra and inter-system compatibility. Top-level requirements have been allocated, and subsequently elaborated, between the Accelerator Systems, Experimental Systems, and Conventional Facilities. FRIB has developed a number of methods and tools to track requirements, establish interfaces, monitor design progress, and ensure overall system integration. These will be described in the paper.

THPAC20

Beam Position and Phase Measurements of Microampere Beams at the Michigan State University ReA3 Facility

1187

J.L. Crisp, B. Durickovic, G. Kiupel, D. Leitner, J.A. Rodriguez, T. Russo, R.C. Webber, W. Wittmer
FRIB, East Lansing, Michigan, USA
C.I. Briegel, N. Eddy, B.J. Fellenz, D. Slimmer
Fermilab, Batavia, USA
D. Constan-Wahl, S.W. Krause, S. Nash
NSCL, East Lansing, Michigan, USA
M. Wendt
CERN, Geneva, Switzerland

A high power CW, heavy ion linac will be the driver accelerator for the Facility for Rare Isotope Beams being designed at Michigan State University. The linac requires a Beam Position Monitoring (BPM) system with better than 100 micron resolution at 100 microamperes beam current. A low beam current test of the candidate technology, button pick-ups and direct digital down-conversion signal processing, was conducted in the ReA3 re-accelerated beam facility at MSU. The test is described. Beam position and phase measurement results, demonstrating ~200 micron and ~1 degree resolution in a 90 kHz bandwidth for a 0.5 microampere beam current, are reported.

FRYBA1

Progress towards the Facility for Rare Isotope Beams

1453

J. Wei, N.K. Bultman, F. Casagrande, C. Compton, K.D. Davidson, J. DeKamp, B. Drewyor, K. Elliott, A. Facco, P.E. Gibson, T . Glasmacher, K. Holland, M.J. Johnson, S. Jones, D. Leitner, M. Leitner, G. Machicoane, F. Marti, D. Morris, J.A. Nolen, J.P. Ozelis, S. Peng, J. Popielarski, L. Popielarski, E. Pozdeyev, T. Russo, K. Saito, J.J. Savino, R.C. Webber, M. Williams, T. Xu, Y. Yamazaki, A. Zeller, Y. Zhang, Q. Zhao
FRIB, East Lansing, USA
D. Arenius, V. Ganni
JLAB, Newport News, Virginia, USA
A. Facco
INFN/LNL, Legnaro (PD), Italy
R.E. Laxdal
TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada
J.A. Nolen
ANL, Argonne, USA

Funding: Work supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661
The Facility for Rare Isotope Beams (FRIB) is based on a continuous-wave superconducting heavy ion linac to accelerate all the stable isotopes to above 200 MeV/u with a beam power of up to 400 kW. At an average beam power approximately two-to-three orders-of-magnitude higher than those of operating heavy-ion facilities, FRIB stands at the power frontier of the accelerator family - the first time for heavy-ion accelerators. To realize this innovative performance, superconducting RF cavities are used starting at the very low energy of 500 keV/u, and beams with multiple charge states are accelerated simultaneously. Many technological challenges specific for this linac have been tackled by the FRIB team and collaborators. Furthermore, the distinct differences from the other types of linacs at the power front must be clearly understood to make the FRIB successful. This report summarizes the technical progress made in the past years to meet these challenges.