PAC2013 - List of Authors (Rhein, C.)

Paper	Title	Page
THPAC09	Ultra-high Vacuum Seal for Long Chambers using Wire Seals	1157
	H.C. Fernandes, P.L. Cappadoro, T.M. Corwin, D.A. Harder, P. He, C.A. Kitegi, W. Licciardi, M.M. Musardo, G. Rakowsky, J. Rank, C. Rhein, T. Tanabe BNL, Upton, Long Island, New York, USA
	Funding: DOE As the length of insertion devices (ID’s) increase for synchrotron light sources, so does the need to have larger ultra high vacuum (UHV) sealed chambers, which in turn necessitates the use of creative ways of sealing these large chambers in the UHV range (10^-11 torrs).The method specified below was used to seal a 4 meter test vacuum chamber successfully in the ultra high vacuum range. This method could be used for sealing ID chambers of lengths larger than 4 meters too due to its simplicity and reduced cost advantage.

THPAC15	NSLS-II Magnetic Measurement System Facility	1172
	M.M. Musardo, T.M. Corwin, D.A. Harder, P. He, C.A. Kitegi, W. Licciardi, G. Rakowsky, J. Rank, C. Rhein, T. Tanabe BNL, Upton, Long Island, New York, USA
	The National Synchrotron Light Source II at Brookhaven National Laboratory (BNL) is a storage ring of 3 GeV electron beam energy that will provide ultra high brightness and flux and exceptional beam stability using advanced insertion devices (IDs). The magnetic characterization of these devices is important to achieve these performances. In order to perform precise and accurate measurements of the NSLS-II IDs, several recent improvements on actual magnetic measurement system have been developed. The system includes a flipping coil bench to measure the first and second magnetic field integrals and a Hall probe bench to perform magnetic field measurements of different types of IDs. The main features of the hardware system, control program and the recent improvements in the magnetic measurements system are presented.

Paper

Title

Page

Ultra-high Vacuum Seal for Long Chambers using Wire Seals

1157

H.C. Fernandes, P.L. Cappadoro, T.M. Corwin, D.A. Harder, P. He, C.A. Kitegi, W. Licciardi, M.M. Musardo, G. Rakowsky, J. Rank, C. Rhein, T. Tanabe
BNL, Upton, Long Island, New York, USA

Funding: DOE
As the length of insertion devices (ID’s) increase for synchrotron light sources, so does the need to have larger ultra high vacuum (UHV) sealed chambers, which in turn necessitates the use of creative ways of sealing these large chambers in the UHV range (10^-11 torrs).The method specified below was used to seal a 4 meter test vacuum chamber successfully in the ultra high vacuum range. This method could be used for sealing ID chambers of lengths larger than 4 meters too due to its simplicity and reduced cost advantage.

THPAC15

NSLS-II Magnetic Measurement System Facility

1172

M.M. Musardo, T.M. Corwin, D.A. Harder, P. He, C.A. Kitegi, W. Licciardi, G. Rakowsky, J. Rank, C. Rhein, T. Tanabe
BNL, Upton, Long Island, New York, USA

The National Synchrotron Light Source II at Brookhaven National Laboratory (BNL) is a storage ring of 3 GeV electron beam energy that will provide ultra high brightness and flux and exceptional beam stability using advanced insertion devices (IDs). The magnetic characterization of these devices is important to achieve these performances. In order to perform precise and accurate measurements of the NSLS-II IDs, several recent improvements on actual magnetic measurement system have been developed. The system includes a flipping coil bench to measure the first and second magnetic field integrals and a Hall probe bench to perform magnetic field measurements of different types of IDs. The main features of the hardware system, control program and the recent improvements in the magnetic measurements system are presented.