PAC2013 - List of Authors (Quigley, P.)

Paper	Title	Page
WEPAC11	Cornell's Main Linac Cryo-module Prototype	811
	R.G. Eichhorn, G.M. Ge, Y. He, G.H. Hoffstaetter, M. Liepe, T. O'Connel, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Funding: Supported by NSF award DMR-0807731 In preparation to built an energy-recovery linac (ERL) based synchrotron-light facility at Cornell University which can provide greatly improved X-ray beams due to the high electron-beam quality that is available from a linac, a phase 1 R&D program was launched, adressing critical challenges in the design. One of them being a full linac cryo-module, housing 6 superconducting cavities (operated at 1.8 K in cw mode), 7 HOM absorbers and 1 magnet/ BPM section. The final design will be presented and a report on the fabrication status that started in late 2012 will be given

THPMA07	Cryomodule Performance of the Main Linac Prototype Cavity for Cornell's Energy Recovery Linac	1367
	N.R.A. Valles, R.G. Eichhorn, F. Furuta, G.M. Ge, D. Gonnella, D.L. Hall, Y. He, K.M.V. Ho, G.H. Hoffstaetter, M. Liepe, T.I. O'Connell, S. Posen, P. Quigley, J. Sears, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Funding: NSF Grants: NSF DMR-0807731 and NSF PHY-1002467 Energy Recovery Linacs (ERLs) require strong damping of higher-order modes in main linac cavities to avoid beam loss from beam break-up effects. In addition, the cavities need to have very high intrinsic quality factors to minimize the size of cryogenic plants in CW cavity operation. We present world record results for a fully equipped multicell cavity in a cryomodule, reaching intrinsic quality factors at operating accelerating field of Q₀(E =16.2 MV/m, 1.8~K) > 6.0\ee10 and Q₀(E =16.2 MV/m, 1.6~K) = 1.0\ee{11}, corresponding to a residual surface resistance of 1.1~nΩ.

Paper

Title

Page

Cornell's Main Linac Cryo-module Prototype

811

R.G. Eichhorn, G.M. Ge, Y. He, G.H. Hoffstaetter, M. Liepe, T. O'Connel, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Funding: Supported by NSF award DMR-0807731
In preparation to built an energy-recovery linac (ERL) based synchrotron-light facility at Cornell University which can provide greatly improved X-ray beams due to the high electron-beam quality that is available from a linac, a phase 1 R&D program was launched, adressing critical challenges in the design. One of them being a full linac cryo-module, housing 6 superconducting cavities (operated at 1.8 K in cw mode), 7 HOM absorbers and 1 magnet/ BPM section. The final design will be presented and a report on the fabrication status that started in late 2012 will be given

THPMA07

Cryomodule Performance of the Main Linac Prototype Cavity for Cornell's Energy Recovery Linac

1367

N.R.A. Valles, R.G. Eichhorn, F. Furuta, G.M. Ge, D. Gonnella, D.L. Hall, Y. He, K.M.V. Ho, G.H. Hoffstaetter, M. Liepe, T.I. O'Connell, S. Posen, P. Quigley, J. Sears, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Funding: NSF Grants: NSF DMR-0807731 and NSF PHY-1002467
Energy Recovery Linacs (ERLs) require strong damping of higher-order modes in main linac cavities to avoid beam loss from beam break-up effects. In addition, the cavities need to have very high intrinsic quality factors to minimize the size of cryogenic plants in CW cavity operation. We present world record results for a fully equipped multicell cavity in a cryomodule, reaching intrinsic quality factors at operating accelerating field of Q₀(E =16.2 MV/m, 1.8~K) > 6.0\ee10 and Q₀(E =16.2 MV/m, 1.6~K) = 1.0\ee{11}, corresponding to a residual surface resistance of 1.1~nΩ.