PAC2013 - List of Authors (Carli, C.)

Paper

Title

Page

Multi-Turn Injection of 50 MeV Protons Into the CERN Proton Synchrotron Booster

442

V. Raginel, E. Benedetto, C. Carli, B. Mikulec
CERN, Geneva, Switzerland

Since 1978, Linac2 produces beams of 50 MeV protons with a current around 160 mA, which are injected into the CERN Proton Synchrotron Booster (PSB) with conventional multi-turn injection using a horizontal septum. It is planned to replace Linac2 during a future long stop with a new H⁻ linac, Linac4, injecting at higher energy (160 MeV) and making use of the modern charge-exchange injection principle. Due to the age of Linac2 and to a delicate vacuum situation the risk of a serious Linac2 breakdown has to be considered. Therefore it is necessary to study if the PSB could produce beams useful for the LHC and other experiments injecting a Linac4 proton beam at 50 MeV with much lower average current compared to Linac2 and without the need for a long installation of the 160 MeV H⁻ injection hardware. Benchmarking of the PSB injection model with the existing injection system with Linac2 using the ORBIT code has been done for a LHC-type beam and then the injection model was used to estimate the brightness for LHC-type beams that could potentially be reached in one PSB ring with the injection of a Linac4 proton beam at 50 MeV.

Slides TUODB3 [2.862 MB]

Paper	Title	Page
TUODB3	Multi-Turn Injection of 50 MeV Protons Into the CERN Proton Synchrotron Booster	442
	V. Raginel, E. Benedetto, C. Carli, B. Mikulec CERN, Geneva, Switzerland
	Since 1978, Linac2 produces beams of 50 MeV protons with a current around 160 mA, which are injected into the CERN Proton Synchrotron Booster (PSB) with conventional multi-turn injection using a horizontal septum. It is planned to replace Linac2 during a future long stop with a new H⁻ linac, Linac4, injecting at higher energy (160 MeV) and making use of the modern charge-exchange injection principle. Due to the age of Linac2 and to a delicate vacuum situation the risk of a serious Linac2 breakdown has to be considered. Therefore it is necessary to study if the PSB could produce beams useful for the LHC and other experiments injecting a Linac4 proton beam at 50 MeV with much lower average current compared to Linac2 and without the need for a long installation of the 160 MeV H⁻ injection hardware. Benchmarking of the PSB injection model with the existing injection system with Linac2 using the ORBIT code has been done for a LHC-type beam and then the injection model was used to estimate the brightness for LHC-type beams that could potentially be reached in one PSB ring with the injection of a Linac4 proton beam at 50 MeV.
	Slides TUODB3 [2.862 MB]