CLASSE, Ithaca, New York, USA
Cornell University, Ithaca, New York, USA
Energy Recovery Linacs (ERLs) are proposed as drivers for hard X-ray sources because of their ability to produce electron bunches with small, flexible cross sections and short lengths at high repetition rates. The advantages of ERL lightsources will be explained, and the status of plans for such facilities will be described. In particular, Cornell University plans to build an ERL light source, and the preparatory research for its construction will be discussed. This will include the prototype injector for high current CW ultra-low emittance beams, superconducting CW technology, the transport of low emittance beams, halo formation from intrabeam scattering, the mitigation of ion effects, the suppression of instabilities, and front to end simulations. Several of these topics could become important for other modern light source projects, such as SASE FELs, HGHG FELs, and XFELOs.
JLAB, Newport News, Virginia, USA
Energy Recovery Linacs are being considered for applications in present and future light sources. ERLs take advantage of the continuous operation of superconducting rf cavities to accelerate high average current beams with low losses. The electrons can be directed through bends, undulators, and wigglers for high brightness x ray production. They are then decelerated to low energy, recovering power so as to minimize the required rf drive and electrical draw. When this approach is coupled with advanced continuous wave injectors, very high power, ultra-short electron pulse trains of very high brightness can be achieved. This paper reviews the status of worldwide programs and discusses the technology challenges to provide such beams for photon production.
BNL, Upton, Long Island, New York, USA
* V.N. Litvinenko, I. Ben-Zvi, Proceedings of FEL'2004, http://jacow.org/f04/papers/WEBOS04/
JLAB, Newport News, Virginia, USA
We describe the design of the SRF ERL providing the CW electron drive beam at the Jefferson Lab UV FEL. Based on the same 135 MeV linear accelerator as – and sharing portions of the recirculator with – the Jefferson Lab 10 kW IR Upgrade FEL, the UV driver ERL uses a novel bypass geometry to provide transverse phase space control, bunch length compression, and nonlinear aberration compensation (including correction of RF curvature effects) without the use of magnetic chicanes or harmonic RF. Stringent phase space requirements at the wiggler, low beam energy, high beam current, and use of a pre-existing facility and legacy hardware subject the design to numerous constraints. These are imposed not only by the need for both transverse and longitudinal phase space management, but also by the potential impact of collective phenomena (space charge, wakefields, beam break-up (BBU), and coherent synchrotron radiation (CSR)), and by interactions between the FEL and the accelerator RF system. This report addresses these issues and presents the accelerator design solution that now successfully supports FEL lasing.
SLAC, Menlo Park, California, USA
SLAC is investigating long-range options for building a high performance light source machine while reusing the existing linac and PEP-II tunnels. One previously studied option is the PEP-X low emittance storage ring. The alternative option is based on a superconducting Energy Recovery Linac (ERL) and the PEP-X design. The ERL advantages are the low beam emittance, short bunch length and small energy spread leading to better qualities of the X-ray beams. Two ERL configurations differed by the location of the linac have been studied. Details of the lattice design and the results of beam transport simulations with the coherent synchrotron radiation effects are presented
JLAB, Newport News, Virginia, USA
We explore possible upgrades of the existing Jefferson Laboratory IR/UV FEL driver to higher electron beam energy and shorter wavelength through use of multipass recirculation to drive an amplifier FEL. The system would require beam energy at the wiggler of 600 MeV with 1 mA of average current. The system must generate a high brightness beam, configure it appropriately, and preserve beam quality through the acceleration cycle - including multiple recirculations - and appropriately manage the phase space during energy recovery. The paper will discuss preliminary design analysis of the longitudinal match, space charge effects in the linac, and recirculator design issues, including the potential for the microbunching instability. A design concept for the recirculator and a lattice solution will be presented.