SLAC, Menlo Park, California, USA
The SUPER-B detector solenoid has a strong 1.5 T field in the Interaction Region (IR) area, and its tails extend over the range of several meters. The main effect of the solenoid field is the coupling of the horizontal and vertical betatron motion which needs to be corrected in order to preserve the small design beam size at the Interaction Point. The additional complications are that: a) due to the crossing angle the solenoid is not parallel to either of the two beams, thus leading to orbit and dispersion perturbations; b) the solenoid overlaps the innermost IR permanent quadrupoles, which will cause additional coupling effects. The proposed correction system provides local compensation of the solenoid effects independently for each side of the IR. It includes “bucking” solenoids to remove the unwanted long solenoid field tails and a set of skew quadrupoles, dipole correctors and anti-solenoids to cancel all linear perturbations to the optics. The details of the correction system design are presented.
SLAC, Menlo Park, California, USA
INFN/LNF, Frascati (Roma), Italy
SLAC, Menlo Park, California, USA
LPSC, Grenoble, France
CERN, Geneva, Switzerland
INFN/LNF, Frascati (Roma), Italy
BINP SB RAS, Novosibirsk, Russia
IN2P3-LAPP, Annecy-le-Vieux, France
CEA, Gif-sur-Yvette, France
INFN Genova, Genova, Italy
University of Pisa and INFN, Pisa, Italy
BINP, Novosibirsk, Russia
LAL, Orsay, France
The SuperB international team continues to optimize the design of an electron-positron collider, which will allow the enhanced study of the origins of flavor physics. The project combines the best features of a linear collider (high single-collision luminosity) and a storage-ring collider (high repetition rate), bringing together all accelerator physics aspects to make a very high luminosity of 1036 cm-2 s-1. This asymmetric-energy collider with a polarized electron beam will produce hundreds of millions of B-mesons at the Y(4S) resonance. The present design is based on extremely low emittance beams colliding at a large Piwinski angle to allow very low ßy* without the need for ultra short bunches. Use of crab-waist sextupoles will enhance the luminosity, suppressing dangerous resonances and allowing for a higher beam-beam parameter. The project has flexible beam parameters, improved dynamic aperture, and spin-rotators in the Low Energy Ring for longitudinal polarization of the electron beam at the Interaction Point. Optimized for best colliding-beam performance, the facility may also provide high-brightness photon beams for synchrotron-radiation applications.
JLAB, Newport News, Virginia, USA
Northern Illinois University, DeKalb, Illinois, USA
Cockcroft Institute, Warrington, Cheshire, United Kingdom
GOO Zaryad, Novosibirsk, Russia
ANL, Argonne, USA
ODU, Norfolk, Virginia, USA
SLAC, Menlo Park, California, USA
An electron-ion collider (MEIC) is envisioned as the primary future of the JLab nuclear science program beyond the 12 GeV upgraded CEBAF. The present MEIC design selects a ring-ring collider option and covers a CM energy range up to 51 GeV for both polarized light ions and un-polarized heavy ions, while higher CM energies could be reached by a future upgrade. The MEIC stored colliding ion beams, which will be generated, accumulated and accelerated in a green field ion complex, are designed to match the stored electron beam injected at full energy from the CEBAF in terms of emittance, bunch length, charge and repetition frequency. This design strategy ensures a high luminosity above 1034 s−1cm-2. A unique figure-8 shape collider ring is adopted for advantages of preserving ion polarization during acceleration and accommodation of a polarized deuteron beam for collisions. Our recent effort has been focused on completing this conceptual design as well as design optimization of major components. Significant progress has also been made in accelerator R&D including chromatic correction and dynamical aperture, beam-beam, high energy electron cooling and polarization tracking.