2011 Particle Accelerator Conference - List of Authors (Sukhanov, A.I.)

Paper

Title

Page

High Power Tests of Dressed Superconducting 1.3 GHz RF Cavities

949

A. Hocker, E.R. Harms, A. Lunin, A.I. Sukhanov
Fermilab, Batavia, USA

Funding: U.S. Department of Energy, Contract No. DE-AC02-07CH11359
A single-cavity test cryostat is used to conduct pulsed high power RF tests of superconducting 1.3 GHz RF cavities at 2 K. The cavities under test are welded inside individual helium vessels and are outfitted (“dressed”) with a fundamental power coupler, higher-order mode couplers, magnetic shielding, a blade tuner, and piezoelectric tuners. The cavity performance is evaluated in terms of accelerating gradient, unloaded quality factor, and field emission, and the functionality of the auxiliary components is verified. Test results from the first set of dressed cavities are presented here.

TUP088

Resonance Effects of Longitudinal HOMs in Project X Linac

991

V.P. Yakovlev, I.G. Gonin, T.N. Khabiboulline, A. Lunin, N. Solyak, A.I. Sukhanov, A. Vostrikov
Fermilab, Batavia, USA
A. Saini
University of Delhi, Delhi, India

High-order mode influence on the beam longitudinal and transverse dynamics is considered for the 650 MHz section of the Project X linac. RF losses caused by HOMs are analyzed. Necessity of HOM dampers in the SC cavities of the linac is discussed.

FROBS5

1.3 GHz Superconducting RF Cavity Program at Fermilab

2586

C.M. Ginsburg, T.T. Arkan, S. Barbanotti, H. Carter, M.S. Champion, L.D. Cooley, C.A. Cooper, M.H. Foley, M. Ge, C.J. Grimm, E.R. Harms, A. Hocker, R.D. Kephart, T.N. Khabiboulline, J.R. Leibfritz, A. Lunin, J.P. Ozelis, Y.M. Pischalnikov, A.M. Rowe, W. Schappert, D.A. Sergatskov, A.I. Sukhanov, G. Wu
Fermilab, Batavia, USA

Funding: Work supported by Fermi Research Alliance, LLC under contract DE-AC02-07CH11359 with the U.S. Department of Energy.
At Fermilab, 9-cell 1.3 GHz superconducting RF (SRF) cavities are prepared, qualified, and assembled into cryomodules, for Project X, an International Linear Collider, or other future projects. The 1.3 GHz SRF cavity program includes targeted R&D on 1-cell 1.3 GHz cavities for cavity performance improvement. Production cavity qualification includes cavity inspection, surface processing, clean assembly, and one or more cryogenic low-power CW qualification tests which typically include performance diagnostics. Qualified cavities are welded into helium vessels and are cryogenically tested with pulsed high-power. Well performing cavities are assembled into cryomodules for pulsed high-power testing in a cryomodule test facility, and possible installation into a beamline. The overall goals of the 1.3 GHz SRF cavity program, supporting facilities, and accomplishments are described.

Slides FROBS5 [3.749 MB]

Paper	Title	Page
TUP071	High Power Tests of Dressed Superconducting 1.3 GHz RF Cavities	949
	A. Hocker, E.R. Harms, A. Lunin, A.I. Sukhanov Fermilab, Batavia, USA
	Funding: U.S. Department of Energy, Contract No. DE-AC02-07CH11359 A single-cavity test cryostat is used to conduct pulsed high power RF tests of superconducting 1.3 GHz RF cavities at 2 K. The cavities under test are welded inside individual helium vessels and are outfitted (“dressed”) with a fundamental power coupler, higher-order mode couplers, magnetic shielding, a blade tuner, and piezoelectric tuners. The cavity performance is evaluated in terms of accelerating gradient, unloaded quality factor, and field emission, and the functionality of the auxiliary components is verified. Test results from the first set of dressed cavities are presented here.

TUP088	Resonance Effects of Longitudinal HOMs in Project X Linac	991
	V.P. Yakovlev, I.G. Gonin, T.N. Khabiboulline, A. Lunin, N. Solyak, A.I. Sukhanov, A. Vostrikov Fermilab, Batavia, USA A. Saini University of Delhi, Delhi, India
	High-order mode influence on the beam longitudinal and transverse dynamics is considered for the 650 MHz section of the Project X linac. RF losses caused by HOMs are analyzed. Necessity of HOM dampers in the SC cavities of the linac is discussed.

FROBS5	1.3 GHz Superconducting RF Cavity Program at Fermilab	2586
	C.M. Ginsburg, T.T. Arkan, S. Barbanotti, H. Carter, M.S. Champion, L.D. Cooley, C.A. Cooper, M.H. Foley, M. Ge, C.J. Grimm, E.R. Harms, A. Hocker, R.D. Kephart, T.N. Khabiboulline, J.R. Leibfritz, A. Lunin, J.P. Ozelis, Y.M. Pischalnikov, A.M. Rowe, W. Schappert, D.A. Sergatskov, A.I. Sukhanov, G. Wu Fermilab, Batavia, USA
	Funding: Work supported by Fermi Research Alliance, LLC under contract DE-AC02-07CH11359 with the U.S. Department of Energy. At Fermilab, 9-cell 1.3 GHz superconducting RF (SRF) cavities are prepared, qualified, and assembled into cryomodules, for Project X, an International Linear Collider, or other future projects. The 1.3 GHz SRF cavity program includes targeted R&D on 1-cell 1.3 GHz cavities for cavity performance improvement. Production cavity qualification includes cavity inspection, surface processing, clean assembly, and one or more cryogenic low-power CW qualification tests which typically include performance diagnostics. Qualified cavities are welded into helium vessels and are cryogenically tested with pulsed high-power. Well performing cavities are assembled into cryomodules for pulsed high-power testing in a cryomodule test facility, and possible installation into a beamline. The overall goals of the 1.3 GHz SRF cavity program, supporting facilities, and accomplishments are described.
	Slides FROBS5 [3.749 MB]