ANL, Argonne, USA
During the design of the 60.635 MHz RFQ for the ATLAS efficiency and intensity upgrade*, we have established a new full 3D approach for the electromagnetic and beam dynamics simulations of a RFQ. A Detailed full 3D model (four meter long) including vane modulation was built and simulated using CST Microwave Studio, which is made possible by the ever advancing computing capabilities. The approach was validated using experimental measurements on a prototype 57.5 MHz RFQ**. The effects of the radial matchers, vane modulation and tuners on the resonant frequency and field flatness have been carefully studied. The full 3D field distribution was used for beam dynamics simulations using both CST Particle Studio and the beam dynamics code TRACK***. In the final design we have used trapezoidal modulation instead of the standard sinusoidal in the accelerating section of the RFQ to achieve more energy gain for the same length, following the leading work of the Protvino group****. In our case, the output energy increased from 260 keV/u to 295 keV/u with minimal change in the beam dynamics.
* P.N. Ostroumov et al, Proceedings of LINAC-2010
** P.N. Ostroumov et al, Proceedings of LINAC-2006
*** TRACK @ http://www.phy.anl.gov/atlas/TRACK
**** O.K. Belyaev et al, Proceedings of LINAC-2000
ANL, Argonne, USA
ANL, Argonne, USA
AES, Medford, NY, USA
ANL, Argonne, USA
An energy upgrade to the heavy-ion accelerator ATLAS at Argonne Lab is progressing*,**. The plans include replacing split-ring cavities with high performance quarter wave resonators. The new 72.75 MHz resonators are designed for optimum ion velocity β=.077 and a record high accelerating voltage of 2.5 MV by modifying the top geometry and reducing the peak surface fields. This new cavity has a longer center conductor than the 109 MHz cavities previously built by ANL with AES assistance, this and the other geometry changes add new engineering requirements to the design. This paper presents the engineering studies that were performed to resolve new issues. These studies include determining structural frequencies of the center conductor and stiffening methods, resonator frequency sensitivity to helium pressure fluctuations, and determining stress levels due to pressure and slow tuning. Evaluation of fast piezoelectric tuner frequency shift to tuner load was also performed and the local cavity shape was optimized based on these results.
* P.N. Ostroumov, et.al, “A New Atlas Efficiency and Intensity Upgrade Project,” SRF2009, tuppo016
** P.N. Ostroumov, et.al., “Efficiency and Intensity Upgrade of the Atlas Facility,” LINAC 2010, MOP045
AES, Medford, NY, USA
ANL, Argonne, USA
TechSource, Santa Fe, New Mexico, USA
The upgrade for the ATLAS facility is designed to increase the efficiency and intensity of beams for the user facility*, **. This will be accomplished with a new CW normal conducting RFQ, which will increase both transverse and longitudinal acceptance of the LINAC. This RFQ must operate over a wide range of power levels to accelerate ion species from protons to uranium. The RFQ design is a split coaxial structure and is made of OFE copper. The geometry of the design must be stable during operation. Engineering studies of the design at different RF power levels were conducted to ensure that the geometry requirements were met. Frequency shift analysis was also completed to determine the effects of high power levels. Thermal stress analysis was completed to show that the structure frequency is repeatable.
*P.N. Ostroumov, et.al, “A New Atlas Efficiency and Intensity Upgrade Project,” SRF2009, tuppo016
**P.N. Ostroumov, et.al., “Efficiency and Intensity Upgrade of the Atlas Facility,” LINAC 2010, MOP045
ANL, Argonne, USA
BNL, Upton, Long Island, New York, USA
An Electron Beam Ion Source (EBIS) being developed at the Argonne National Laboratory (ANL) will be used to charge breed rare isotopes from a 1 Ci 252Cf source, the Californium Rare Isotope Breeder Upgrade (CARIBU). Simulations have been performed using commercially available software, TriComp, to ensure the electron collector is properly designed to dissipate the electron beam power and provide adequate acceptance for the injected ion beam.
Fermilab, Batavia, USA
ANL, Argonne, USA
* V. Lebedev, "Intrabeam Stripping in H− Linacs", LINAC2010
** P. Ostroumov, "TRACK, The Beam Dynamics Code", PAC2005
Northern Illinois University, DeKalb, Illinois, USA
JLAB, Newport News, Virginia, USA
ANL, Argonne, USA
ANL, Argonne, USA
ATLAS (Argonne Tandem Linac Accelerator System) upgrade requires several substantial developments in accelerator technologies, such as CW heavy ion RFQ and high-performance cryomodule with low-beta cavities. The upgrade project is well advanced. The physics and engineering design of the RFQ are complete and fabrication of OFE copper parts is in progress. The 3.9-meter length RFQ is composed from 5 strongly coupled segments. High-temperature furnace brazing of the segments is planned for the summer of 2011. The RFQ design includes several innovative features such as trapezoidal vane tip modulation, compact output radial matcher to form an axially symmetric beam. The upgrade project also includes development and construction of a cryomodule containing seven 72.75 MHz SC quarter wave cavities designed for the geometrical β= 0.077 and four SC solenoids. The cavity is designed to obtain an accelerating voltage higher than 2.5 MV. The prototype cavity together with high-power capacitive coupler and piezoelectric tuner has been developed, fabricated and is being tested. This paper reports innovative design features of both RFQ and SRF linac and current status of the project.
JLAB, Newport News, Virginia, USA
Northern Illinois University, DeKalb, Illinois, USA
Cockcroft Institute, Warrington, Cheshire, United Kingdom
GOO Zaryad, Novosibirsk, Russia
ANL, Argonne, USA
ODU, Norfolk, Virginia, USA
SLAC, Menlo Park, California, USA
An electron-ion collider (MEIC) is envisioned as the primary future of the JLab nuclear science program beyond the 12 GeV upgraded CEBAF. The present MEIC design selects a ring-ring collider option and covers a CM energy range up to 51 GeV for both polarized light ions and un-polarized heavy ions, while higher CM energies could be reached by a future upgrade. The MEIC stored colliding ion beams, which will be generated, accumulated and accelerated in a green field ion complex, are designed to match the stored electron beam injected at full energy from the CEBAF in terms of emittance, bunch length, charge and repetition frequency. This design strategy ensures a high luminosity above 1034 s−1cm-2. A unique figure-8 shape collider ring is adopted for advantages of preserving ion polarization during acceleration and accommodation of a polarized deuteron beam for collisions. Our recent effort has been focused on completing this conceptual design as well as design optimization of major components. Significant progress has also been made in accelerator R&D including chromatic correction and dynamical aperture, beam-beam, high energy electron cooling and polarization tracking.